Kyocera Mita Recent Questions, Troubleshooting Help & Support

This is fuser unit error code, you can try to reset it might work, but if the erorr code came back then you need to change the fuser unit.In order to reset this code: follow those stepson the panel press 1087 1087The screen will change to service modeon the panel again press 163now look at the screen and you will see Excute.Select Excute and press the Start key.The Machine will rebot or it will asks you to turn it off and on.After the machine load again, it should be good, if the Error came back!! Then change the Fuser Unit. I’m happy to help further over the phone at https://www.6ya.com/expert/mustafa_06f84c65ab5cc745

What cable usb or network cable

I had the problem that suddenly scan to email did not work anymore. After trying different email provider and all the tips in the internet, I recognized that the time was not in sync. After correcting the time of the printer (settings -> date/time), everything worked fine again.

your error is : C210 Paper conveying motor check paper motor remove and check clean with alcohol and than oil it

check main charger assy.

Machine maintenance(400,000 printed pages) Content of MK : Fuser assembly,Developer assembly,Drum assemby, various feed and other rollers,transfer assembly etc...

BR

I think the two lights flashing together indicates waste toner box missing or full but as this printer doesn't have a waste bottle I assume it means the processing unit (ie the drum bit) needs replacing.

Reinstall the driver again, if it doesnot work, you have to update the firm ware of the machine, you can find this on kyocera website. I’m happy to help further over the phone at https://www.6ya.com/expert/mustafa_06f84c65ab5cc745

need firmware update. will have to be done by factory tech

Hello sir; Just follow my instruction, I will help you to get rid off the error code; With front door open press10871087 then enter 163 press "start" key, final press " stop/clear " key to get out reset procedure.

C3100 Scanner carriage problem

• The home position is not correct
when the power is turned on or copying
the document placed on the contact
glass. Poor contact of
the connector terminals.
Defective scanner
home position
switch.
Defective engine
PCB.
Defective scanner
motor.

Paper feed motor problem.Ensure that all cassettes are correctly loaded with paper.Ensure that by removing the paper cassettes no paper is jammed behind them/in the copier.press 1087 1087 on the key pad,then 906 then start,then execute then start.Press 001 to exit.

scanner card has to be installed in device. scanner file utility has to be use. Or card will have to configured to your network, scan to pc, scan to email, etc

Print/Scan System (U) 083H9503 Network Print Controller and Network Scanner

the 30/40/5035 series machines have two network cards in them. One for printing and one for scanning. and they have separate IP numbers also. make sure you have scanfile utility running on your pc or wherever you are sending the files and the folder set up in the utility. then set it up on the scanner network card.. Not the printer.

MR KIRAN now which type of error is that the machine showing alert mi soon you will get immediate answer thanks

Are the TWAIN drivers installed on the computer?