Kyocera Mita Logo

Kyocera Mita Recent Questions, Troubleshooting Help & Support

Do you work here? Claim your company

  • 200 Products
  • 2K Answers
  • 192K Views

remove the flat wire in the scanner, then remove the railings from the scanner, clean the railings with a soft cloth, if you encounter the c3200 error it only means that the railings of the scanner is dirty, the scanner cannot move. i hope this will fix your problem..... if you have anymore questions regarding kyocera copiers dont hesitate to txt me or call me to this number +639081953003 or +639079941995

Kyocera Mita... | Answered on Mar 21, 2019


1087*2 then 251 and press start it will bring some digits then you clear

Kyocera Mita... | Answered on Mar 07, 2019


It just means take all the pages out of the document feeder on top and put the whole complete document in again

Kyocera Mita... | Answered on Feb 21, 2019


i've been working on kyocera's for about 4 years. now..this error is not good..it's a general system failure..only solution is replacing main board.
contact me if you need a part #.. I can look it up for you

Kyocera Mita... | Answered on Feb 20, 2019


PRESS 10871087 TWICE THEN TYPE 101 YOU WILL FIND MANY TAPES WITH NUMBERS VALUES YOU MAY INCREASE EACH ABOUT 5 DEGREES .HOPE THATS HELPS.

Kyocera Mita... | Answered on Jan 31, 2019


This is fuser unit error code, you can try to reset it might work, but if the erorr code came back then you need to change the fuser unit.

In order to reset this code: follow those steps
on the panel press 1087 1087
The screen will change to service mode
on the panel again press 163
now look at the screen and you will see Excute.
Select Excute and press the Start key.
The Machine will rebot or it will asks you to turn it off and on.
After the machine load again, it should be good, if the Error came back!! Then change the Fuser Unit.

I’m happy to help further over the phone at https://www.6ya.com/expert/mustafa_06f84c65ab5cc745

Kyocera Mita... | Answered on Jan 10, 2019


What cable usb or network cable

Kyocera Mita... | Answered on Dec 29, 2018


I had the problem that suddenly scan to email did not work anymore. After trying different email provider and all the tips in the internet, I recognized that the time was not in sync. After correcting the time of the printer (settings -> date/time), everything worked fine again.

Kyocera Mita... | Answered on Dec 27, 2018


your error is : C210 Paper conveying motor

check paper motor remove and check clean with alcohol and than oil it

Kyocera Mita... | Answered on Dec 08, 2018


check main charger assy.

Kyocera Mita... | Answered on Oct 18, 2018


Machine maintenance(400,000 printed pages) Content of MK : Fuser assembly,Developer assembly,Drum assemby, various feed and other rollers,transfer assembly etc...

BR

Kyocera Mita... | Answered on Sep 29, 2018


I think the two lights flashing together indicates waste toner box missing or full but as this printer doesn't have a waste bottle I assume it means the processing unit (ie the drum bit) needs replacing.

Kyocera Mita... | Answered on Sep 26, 2018


Fuser unit Error code, you can try to reset, but if the code still there, you need to change the fuser unit.
This is the way to reset your fuser code;
On the panel press 1087 1087
this will take you to the service mode,(look into the screen)
now on the panel again press 163 and hit the start key.
Look in the screen, you will see execute, select execute by the arrow and hit the start key, the machine will turn off then on. or it will ask you to turn the main power off than on. this might fix your problem, if not! change the fuser.

I’m happy to help further over the phone at https://www.6ya.com/expert/mustafa_06f84c65ab5cc745

Kyocera Mita... | Answered on Sep 21, 2018


Reinstall the driver again, if it doesnot work, you have to update the firm ware of the machine, you can find this on kyocera website.

I’m happy to help further over the phone at https://www.6ya.com/expert/mustafa_06f84c65ab5cc745

Kyocera Mita... | Answered on Aug 21, 2018


need firmware update. will have to be done by factory tech

Kyocera Mita... | Answered on Jul 20, 2018


Hello sir; Just follow my instruction, I will help you to get rid off the error code; With front door open press10871087 then enter 163 press "start" key, final press " stop/clear " key to get out reset procedure.

Kyocera Mita... | Answered on Jul 19, 2018


C3100 Scanner carriage problem

• The home position is not correct
when the power is turned on or copying
the document placed on the contact
glass. Poor contact of
the connector terminals.
Defective scanner
home position
switch.
Defective engine
PCB.
Defective scanner
motor.

Kyocera Mita... | Answered on Jul 12, 2018


Paper feed motor problem.
Ensure that all cassettes are correctly loaded with paper.
Ensure that by removing the paper cassettes no paper is jammed behind them/in the copier.

press 1087 1087 on the key pad,then 906 then start,then execute then start.
Press 001 to exit.

Kyocera Mita Km... | Answered on Jun 20, 2018

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Kyocera Mita Experts

AAAA262430

Level 2 Expert

49 Answers

Marvin
Marvin

Level 3 Expert

84027 Answers

Jose Pino

Level 3 Expert

563 Answers

Are you a Kyocera Mita Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...