Kymco Logo

Kymco Recent Questions, Troubleshooting Help & Support

Do you work here? Claim your company

  • 414 Products
  • 5K Answers
  • 260K Views

12 volt battery should be 12-13.2 volts dc normal and 14.5-14.8 vdc at rpms if you only get 8.5 vdc then the charge system ( alternator /stator)is not working or the voltage regulator needs replacing

Kymco... | Answered on Mar 22, 2017


Hi, Jenni and the usual suspects are:
1. Ignition Switch not in the "ON" position.
2. Engine Run Switch in the "OFF" position.
3. Discharged battery, needs to be 12.5 volts or better and be able to pass a load test if necessary.
4. Check the battery terminals for damage or corrosion check the battery cables at "BOTH" ends for loose, corroded, or broken connectors, "INSIDE" and outside the cable harness, perform connector wiggle test and check cables with an ohmmeter if necessary.
5. Tip over sensor needs a reset.
6. Faulty ignition switch.
7. Faulty starter button.
8. Faulty kickstand or clutch pull in switch/sensor.
9. Starter control circuit, relay, or solenoid faulty.
10. Main fuse or circuit breaker may be blown or faulty.
11. Check for engine trouble codes.
For more information about your issue and valuable "FREE" downloads that you will need please click on the blue links below. Good luck and have a wonderful day.
Having issues atv starting staying started
Part 1 TaoTao 250cc ATV not starting Think it may be the CDI
KYMCO Mongoose KXR 250 Service Manual
http://www.motopartsmax.com/index.php/main_page/vehicle/tID/1/bID/25
KYMCO Mongoose 250 Owner Manual

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e


Kymco... | Answered on Mar 14, 2017


Check the gas tank's vent. If it's clogged or dirty it will vapor lock when warm

2012 Kymco... | Answered on Mar 12, 2017


Hi, Mickey for this scenario you will need your service/owners manual if you can't find the first and best tool you ever bought for your Yamaha, despair not, for a mere zero $ you can download another one. For more information about your issue and valuable "FREE" downloads that you will need please click on the blue links below. Good luck and have a wonderful day.
downtown seat latch
Kymco Downtown 300i battery removal and look at the engine
KYMCO People GT 300i Service Manual
Kymco DOWNTOWN 300 ABS Parts
KYMCO downtown 300i Owner Manual

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e


2013 Kymco... | Answered on Mar 02, 2017


Hi, Michael and the usual suspects are:
1. Ignition Switch not in the "ON" position.
2. Engine Run Switch in the "OFF" position.
3. Discharged battery, needs to be 12.5 volts or better and be able to pass a load test if necessary.
4. Check the battery terminals for damage or corrosion check the battery cables at "BOTH" ends for loose, corroded, or broken connectors, "INSIDE" and outside the cable harness, perform connector wiggle test and check cables with an ohmmeter if necessary.
5. Tip over sensor needs a reset.
6. Faulty ignition switch.
7. Faulty starter button.
8. Faulty kickstand or clutch pull in switch/sensor.
9. Starter control circuit, relay, or solenoid faulty.
10. Main fuse or circuit breaker may be blown or faulty.
11. Check for engine trouble codes.
For more information about your issue and valuable "FREE" downloads that you will need please click on the blue links below. Good luck and have a wonderful day
Downtown 300i Won Turn Over
http://meiguohosting.com/How-to-fix-start-problem-for-your-2011-Kymco-Downtown-300i
KYMCO People GT 300i Service Manual
Downtown 300i Kymco Scooter Parts Racing Planet USA
KYMCO downtown 300i Owner Manual

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e

2013 Kymco... | Answered on Feb 26, 2017


Hi, Anonymous at ang karaniwang suspects ay ang mga: 1. Malubhang discharged o isang nasira baterya, ay dapat magkaroon 12.5 volts o mas mahusay at maaari able sa pumasa sa isang load test kung kinakailangan. 2. Nabigong alternator / generator at o boltahe regulator. 3. Loose o corroded baterya terminal at o cables lalo na ang "NEGATIVE" cable, hanapin maluwag, corroded, o nasirang connectors sa loob ng cable harness sa "KAPWA" dulo. 4. Nabigong main circuit breaker o ignition switch, i-check para sa maluwag na koneksyon at pagpapatuloy. 5. Nabigong system at o ignition relay, suriin para sa pagpapatuloy. 6. Nabigong pag-aapoy likawin, ignisyon / electronic module. 7. Nabigong CKP, CPS, CMP, MAP, TPS, o BAS sensor, corroded, maluwag o sirang wire connector pins / sockets. 8. Throttle cables at o idle speed hindi wasto nababagay hot idle bilis ay dapat na 950 RPM sa 1000 RPM. 9. Air / fuel timpla tornilyo hindi wasto nababagay. 10. Accelerator pump napinsala o hindi gumagana. 11. Tubig o dumi sa fuel system, karbyurator o filter. 12. Restricted, block o kinked fuel line. 13. Fuel tangke walang laman. 14. Ang gas cap ay hindi venting maayos o fuel tank venting sistema hinarangan. 15. Vacuum linya mula paggamit sari-sari sa petcock nasira, basag, o hindi naka-attach, karbyurator vent line plugged. 16. Needle at upuan natigil closed sa mangkok float. Para sa karagdagang impormasyon tungkol sa iyong isyu at mahalagang "LIBRE" download na kailangan mo mangyaring mag-click sa asul na mga link sa ibaba. Good luck at magkaroon ng isang kahanga-hanga araw.

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e

Kymco... | Answered on Feb 24, 2017


check the pickup coil and the wiring for the shut off switches. if one rubs and grounds itself on the frame it wont spark.

Kymco 2005 MXU... | Answered on Feb 14, 2017


Hi, Fleur for this scenario you will need your service/owners manual if you can't find the first and best tool you ever bought for your Kymco, despair not, for a mere zero $0 you can download another one. For more information about your issue and valuable "FREE" downloads that you will need please click on the links below. Good luck and have a nice day.
2014 kymco pulsar wiring diagram Google Search
Kymco Pulsar 125 Wiring Diagram kymco super 8 50 wiring diagram kymco...
KYMCO AGILITY 125 Service Manual
Genuine Kymco spare parts
http://www.kymcousa.com/owners/onroad/Agility50-125.pdf

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e

Kymco 125 Pulsar... | Answered on Feb 08, 2017


join the wires on the back of the ignition switch. Power wire to one of the others until the ignition light comes on. Better to buy a new key though.



KYMCO Mongoose 90 Specifications KYMCO USA

Kymco 2011... | Answered on Jan 29, 2017


Hi, Optimus for this scenario you will need your service/owners manual if you can't find the first and best tool you ever bought for your Yamaha, despair not, for a mere zero $ you can download another one. For more information about your issue and valuable "FREE" downloads that you will need please click on the links below. Good luck and have a nice day.
How do you change the rear brake shoes on your Scooter
How to replace and adjust the rear brakes on 150 or 50 cc GY6 Chinese...
KYMCO AGILITY 125 Service Manual
Kymco Agility 125 Driver Manual
https://www.oemmotorparts.com/oem4.asp?M=Kymco&T=AGILITY%20125&Y=_&L=KYMCO_Agility%20125

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e


2010 Kymco... | Answered on Jan 28, 2017


sorry we have no idea of the price , check with a motorcycle shop

Kymco... | Answered on Jan 26, 2017


Hi, Luis before diagnosing any turn signal/running light/parking light issue make sure the bulb is good and the light fuse has continuity with a test light. If you have replaced you OEM lights with LED lights you are going to need a load equalizer. If no turn signals work the cause could be a faulty turn signal module or the connector going to it, look for corroded, loose, or broken pins/sockets. Contact spray cleaner is great for removing corrosion. If your speedometer does not function properly it will have to be fixed first because your turn signal module gets the data from the speedometer for normal turn signal function. If your front turn signals don't work use a test light to check for power and ground at the bulb socket, then start backtracking the wiring through every wire connector to the turn signal switch/button and check for continuity, go all the way back to the fuse if necessary to find the cause of the malfunction. If your rear turn signals don't work check your rear fender wiring harness connector first for corroded, broken, loose pins/sockets, power, and a good ground, (the harness connector is usually located under the seat on the front of the rear fender) then keep tracing the wiring look for obvious harness damage caused by the rear tire. If you still can't find the malfunction backtrack from the rear fender wiring harness connector. If one side does not work you could have a faulty turn signal switch or module check for continuity. For more information about your issue and valuable "FREE" downloads that you will need please click on the links below. Good luck and have a nice day.
Turn Signal Troubleshooting Scooter Doc Forum
Fix scooter that does not have working turn signals
http://www.49ccscoot.com/manuals/Kymco_Agility_50_Service_Manual.pdf
Kymco Spare Parts
http://www.kymcousa.com/owners/onroad/Agility50-125.pdf

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e


2008 Kymco... | Answered on Jan 20, 2017


Hi, Victor start by inspecting the fan fuse for this scenario you will need your service/owners manual if you can't find the first and best tool you ever bought for your Yamaha, despair not, for a mere zero $ you can download another one. For more information about your issue and valuable "FREE" downloads that you will need please click on the links below. Good luck and have a nice day.
Electric Cooling Fan
Cooling fan not working
KYMCO XCITING 500 Service Manual
http://www.kymcousa.com/owners/onroad/Xciting250-500_pre2008.pdf
Genuine Kymco spare parts
KYMCO XCITING 250 Owner Manual

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e

Kymco... | Answered on Jan 19, 2017


I think you may have a fuel delivery issue.

Kymco... | Answered on Jan 18, 2017


Hi, Kenneth and the usual suspects are:
1. Extremely lean fuel mixture.
2. Dirt, rust, water, or ethanol sludge in the fuel system.
3. Sticky throttle cables.
4. Multiple carburetors not in synchronization.
5. TPS sensor out of adjustment or faulty.
6. Wrong spark plugs for the type of service.
7. Throttle bodies not in synchronization (FI)
8. Faulty O2 sensor.
9. Clogged, stuck, or faulty IAC valve.
10. Aftermarket components not compatible with ECM.
For more information about your issue and valuable "FREE" downloads that you will need please click on the websites below. Good luck and have a nice day.
http://scooter.wikia.com/wiki/Tuning_a_carburetor
How To Fix Surging Carburetor with Taryl
KYMCO ForU Midi XLS Owner Manual
Kymco Mobility Scooter Parts Spares WheelieGoodMobility co uk
http://www.discountscooters.co.uk/user-manuals

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e


Kymco... | Answered on Jan 13, 2017


Hi, Victor you may have a charging system issue for this scenario you will need your service/owners manual if you can't find the first and best tool you ever bought for your Yamaha, despair not, for a mere zero $ you can download another one. For more information about your issue and valuable "FREE" downloads that you will need please click on the links below. Good luck and have a nice day.
Archived Scooter Startup Questions Won Start at All
http://www.jetav8r.com/Vision/Stator/fault_finding_by_www.electrosport.com.pdf
KYMCO XCITING 500 Service Manual
Genuine Kymco spare parts
KYMCO xciting 500 User Manual

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e

Kymco... | Answered on Jan 13, 2017


Yes a new piston and a rebore of the cylinder if that is the problem. You will need to tear it down to inspect what caused the problem.

Kymco... | Answered on Jan 11, 2017


Hi, Brian for this situation I would call my local dealer or reputable shop's service/parts department and inquire about any possible quick fix, answers, or parts inquiry. For more information about your issue and valuable "FREE" downloads that you will need please click on the links below. Good luck and have a nice day.
Anyone found touchup paint yet
Metallic Paint Kymco Motorcycles Scooters
KYMCO Downtown 200i Service Manual
Kymco Scooter Parts ATVs Scooter Parts Performance Scooter Parts...
http://www.kymcousa.com/owners/onroad/Downtown-300i-Owners-Manual.pdf

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e

Kymco... | Answered on Jan 06, 2017


back firing is usually a sign of an air leak on the intake manifold.

Kymco 2008 MXU... | Answered on Dec 06, 2016

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Kymco Experts

Marvin
Marvin

Level 3 Expert

84581 Answers

Andrew Taylor
Andrew Taylor

Level 3 Expert

26437 Answers

Kardoc

Level 3 Expert

4619 Answers

Are you a Kymco Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...