Kubota Answered Questions & Fixed Issues

The voltage regulator on a Kubota ZG327 mower is typically located within the electrical system of the mower, often near the battery or the engine. The exact location can vary depending on the specific model year and design of the mower. Here are some general steps you can take to locate the voltage regulator:

1. Check the Operator's Manual: The best place to start is by consulting the operator's manual for your Kubota ZG327 mower. The manual should provide information about the location of the voltage regulator and other electrical components.
2. Inspect the Engine Compartment: Open the engine compartment of the mower and look for any electrical components that resemble a voltage regulator. The voltage regulator is usually a rectangular or square-shaped component with wires connected to it.
3. Follow the Wiring: Trace the wiring from the battery and alternator to locate where they connect to the voltage regulator. This can give you an idea of its general location.
4. Look Near the Battery: Voltage regulators are often located near the battery, as they play a role in regulating the charging of the battery.
5. Consult a Service Manual: If you're having trouble locating the voltage regulator, you might want to refer to a service manual for your specific mower model. Service manuals often include detailed diagrams and information about the various components and their locations.
6. Online Resources and Forums: You can also search online for resources specific to your Kubota ZG327 model. Online forums, community websites, and Kubota-specific websites might have discussions or guides related to the location of the voltage regulator.
7. Professional Assistance: If you're unable to locate the voltage regulator on your own, consider seeking assistance from a professional technician or a Kubota dealer. They will have experience with your specific mower model and can help you locate and diagnose any electrical issues.

If the deck release button on your Kubota G5200 HST is stuck and won't release, there are a few steps you can try to resolve the issue:

1. Check for obstructions: Inspect the deck release mechanism for any obstructions or debris that may be preventing the button from releasing. Clear away any debris and ensure the area around the mechanism is clean.
2. Lubricate the mechanism: Use a silicone spray lubricant to lubricate the deck release mechanism. This can help loosen up any stuck parts and allow the button to release.
3. Check the safety switch: The deck release button is connected to a safety switch that prevents the mower blades from turning while the deck is raised. If the safety switch is malfunctioning, it may be preventing the button from releasing. Check the switch for any damage or wear, and replace it if necessary.
4. Use pliers: If none of the above steps work, you can try using a pair of pliers to manually release the deck latch. Grip the release mechanism firmly with the pliers and apply pressure to release the latch.

If you are still unable to release the deck, it may be best to contact a professional Kubota technician for further assistance. They will have the expertise and specialized tools to diagnose and fix the issue safely and efficiently.

https://www.youtube.com/watch?v=nFKBvMo0pS4

Yup you have a D782 engine in it,,,,, https://www.ebay.com/itm/255855741240 this is what it is and looks like. I haven't been able to locate location. Nuts!

E-20 CAN Communication short-circuited. Check the communication line. Check the main ECU connector.

Look for physical abrasions or rodent damage along the harness leading from the engine control unit.

Check for leaks in the hydrostatic transmission lines. Be sure the pedal and it's linkages are connected and clear of obstructions. Check your hydraulic fluid level and condition.

It was made between 1983 and 1990 Kubota B8200 Power: Engine (gross): 19 hp [14.2 kW] PTO (claimed): 16 hp [11.9 kW] (gear) 14.5 hp [10.8 kW] (hydro) You can find more breathtaking information about this tractor at http://www.tractordata.com/farm-tractors/001/2/7/1274-kubota-b8200.html

What model number is the tractor

https://www.youtube.com/watch?v=m9fHI4oPi4o

Question edited for clarity. Question moved from MISC. https://www.google.com/search?q=kubota+m7040+drain+radiator https://www.google.com/search?q=kubota+m7040+radiator+drain+location ..

Check hydraulic fluid level.

Blocked cooling fins (?). Could be trash behind the fan cover or more likely a mouse nested behind the cover. Remove fan cover and thoroughly clean both heads with compressed air until the fins are clear.

THAT answer is about as useful as a tissue paper suit. This guy is an expert? An expert at telling us what we already know. maybe. Does he think that someone would come to this site looking for help only for someone to tell him of how the whole OBD system concept works? The question was make and model specific and for a Kubota mechanic to give him advice because he needs advice from someone with experience rather than a text book mechanic! Anyone can google the code and determine what code says it is, Help is needed in how to fix it and/or some things to try. WTH??

see if this link helps you out. https://www.google.co.uk/webhp?sourceid=chrome-instant&rlz=1C1CHBD_en-GBGB719GB719&ion=1&espv=2&ie=UTF-8#q=M6800+Kubota+S%2FN+71386+year+model

The smaller gauge wire at the starter is likely the feed to ignition switch BAT terminal. So no surprise that the fuse doesn't blow with it disconnected.

Likely there is a short to battery negative (frame) on any of the switched side circuits.

You need to isolate circuits and find the short. Recommend you use an incandescent automotive test lamp to battery positive and probe circuits. Touch probe to battery negative for relative brightness of a short.

Leave the ignition switch in the off position and probe circuits on the back side of the ignition switch. A bright light is a short, a dimmed light is an acceptable load.

You might first try disconnecting the voltage regulator to see if it's the problem, else troubleshoot with test lamp.

Z Series: On right-hand side forward of the rear tire and above the mower deck.

https://www.kubotausa.com/contact/faq/where-is-the-serial-number-located-on-my-turf-equipment

That information is not available. Contact them by phone. Worldwide contact details on page one of this manual. https://kubota.ca/getmedia/f98e6f6e-386b-4fb6-b78f-963dcc5bad2a/L3560,L4060,L4760,L5060,L5460,L6060-ROPS-OPS-EN-TD35019582?ext=.pdf https://www.google.com/search?q=Kubota+L4630+Rear+wiper+motor+wiring Service manual https://manual4you.com/products/kubota-l4630-tractor-workshop-service-repair-manual ..

We have no way of knowing. Ask your supplier.

It's a feature.

... The KRA system incorporates an
override switch on the dash that allows the operator to
override the system and keep the PTO engaged
during reverse travel. ...