Korg Logo

Korg Recent Questions, Troubleshooting Help & Support

Do you work here? Claim your company

  • 193 Products
  • 946 Answers
  • 87K Views

If you have electronic expeerience, take it to a repair shop. You can cause more damage okiong around if you don't know what you're doing.
Past that, contact Korg customer service for the schematic and parts list. The part should be available from Korg directly of from Mouser
http://www.korg.com/us/support/contact
Korg Parts Parts Is Parts Guitar Parts Amplifier Parts Korg Keyboard Parts
Mouser Electronics Electronic Components Distributor
Korg Full Compass

Korg D3200... | Answered on Jul 16, 2016


My experience with these is fairly limited. I find they have to be happy in all respects before they will work at all. When we had our digital switchover the signal strength quadrupled and many top boxes just stopped working while others kept freezing or pixelating. It wasn't until suitable attenuators had been fitted they settled down and began to work.

Lots of people who bought hdd recorders found them unsatisfactory and I know one guy who tried four before he found one that worked for him.

My first hdd recorder had a very short life so I upgraded and got an even worse one so I complained to the manufacturer. After several emails it seemed my new purchase had the oldest software version available. Since the software has been updated it has been quite acceptable.

You didn't say whether the trouble was with playback or tv viewing but I speculate there isn't much wrong if the device boots ok. The software will be stored behind a partition on the hdd. I suggest you check your signal strength and then try updating the software before resorting to sending the unit back for service.

Korg D888 8... | Answered on Jun 16, 2016


FACTORY RESET:
  1. Press the [GLOBAL] button to enter Global mode.
  2. Press the [EXIT] button.
  3. Press the [UTILITY] button
  4. Select "Load Preload Data," by using the ClickPoint [?] button, and press the [CENTER].
  5. Choose "Kind," (All)
  6. Press the [MENU/OK] button.
  7. When a dialog box will ask you, press the [MENU/OK] button

Korg X50 X-50... | Answered on Jun 09, 2016


You have bad contacts on some of your keys. The keyboard has to be taken apart, and electronic contact cleaner has to be sprayed into the contacts to clean them. Press the keys repeatedly to spread the cleaner into the contacts. If the contacts are too badly pitted/rusted from water or other liquid damage, cleaning will not help.

Korg Music | Answered on May 10, 2016


i use korgpa50sd i had some voices by default but once when i inserted my sd card into the arranger every voices got deleted and now everything is new...so can you please help me to get back the old voices?

Korg Pa50... | Answered on Apr 30, 2016


The import needs to happen from a computer (or a CD-RW) >D3200, not from a flash drive or backup drive.

Korg D3200... | Answered on Apr 29, 2016


The contacts are probably dirty or bent. The keyboard is relatively easy to remove if you have any experience.

Korg Music | Answered on Apr 29, 2016

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Korg Experts

ray gallant
ray gallant

Level 3 Expert

61719 Answers

Tom Chichester

Level 3 Expert

51301 Answers

JonSnell Electronic
JonSnell Electronic

Level 3 Expert

29394 Answers

Are you a Korg Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...