Konica Minolta Popular Questions, Answers, Tips & Manuals

https://printcopy.info/?l=en&mod=erc&brand=Konica-Minolta&model=bizhub%20C368 https://www.youtube.com/watch?v=AXDRVullvEY https://www.manualslib.com/manual/1276303/Konica-Minolta-Bizhub-C658.html#product-bizhub C368 link with issues with error cd-011 http://www.copytechnet.com/forums/konica-minolta/106003-konica-c368-troble-code-cd011-d011-f114.html My copier at work is different brand but when it seems to stop working, turning the power off and on does not always work. We will turn it off unplug it from the wall and plug it back in 10 or 15 minutes later and most time it will work again.

Registration motor (M5) Printer control board (PRCB) ADU drive board (ADUDB) Any of the one above, but I would start with the Motor check the registration roller its the big roller (length wise prior to the drum section.

Push down Stop buttom and switch on.

Please refer to the service manuals and this.

Replacing a Drum Unit

Konica Minolta Manuals https://manuals.konicaminolta.eu > contents After Drum Unit replacement step 1 has been completed, check that the red-circled lock is located at the position indicated by a dashed line, then execute step ...

Konica Minolta REGIUS 190 Service Manual

ManualsLib https://www.manualslib.com > ... > REGIUS 190 View and Download Konica Minolta REGIUS 190 service manual online. REGIUS 190 medical equipment pdf manual download. Also for: Dd-941.

Konica Minolta - Regius 190 Community, Manuals and ...

MedWrench https://www.medwrench.com > equipment > konica-m... Konica Minolta - Regius 190 by Konica Minolta. Konica Minolta - Regius 190. Forums ... Regius 190 Service Manual. SERVICE COMPANIESView All Computed Radiography ...

Konica Minolta Regius 190 (DD 941) Service Manual

Internet Archive https://archive.org > details > manual_Konica_Minolta... May 20, 2020 - KONICA MINOLTA. DIRECT DIGITIZER. REGIUS MODEL 190. (DD-941). SERVICE MANUAL. KONICA MINOLTA MEDICAL & GRAPHIC, INC. ..https://www.youtube.com/watch?v=lqfANSFl6Io

What is the model and the code is C8650??????

Try reboot the machine or try trouble reset.CEEE3 is engine section undefined malfuction.Check the PRCB connections.

Unless you have access to the MY Konica Minolta Web site you will not be authorized to have access to it Copier firmware belongs to Konica Minolta

I searched the internet using https://www.google.com and found the following result, that may require a technician to resolve: https://printcopy.info/?l=en&mod=erc&brand=Konica-Minolta&model=bizhub%20C368&code=C5360

Code

C5360

Description

Clean unit fan failure to turn (When CU-101 is installed). The fan lock signal remains HIGH for a predetermined continuous period of time while the fan is turning.

Causes

• Exhaust fan/1 (FM14) • Exhaust fan/2 (FM15) • Suction fan (FM16) • Clean unit drive board (CUDB) • MFP board (MFPB)

Remedy

1. Check the connector between CUDB CN1-MFPB CN32E for proper connection and correct as necessary. 2. Check the connector between FM14-CUDB CN3, FM15-CUDB CN2, FM16-relay CN183-CUDB CN4 for proper connection and correct as necessary. 3. Check the fan for possible overload and correct as necessary. 4. FM14, FM15, FM16 operation check • Load check: Check code42, Multi code 4 • Control signal: CUDB CN3 (FM14), CUDB CN2 (FM15), CUDB CN4 (FM16) • Location of electrical component: 14-X 5. Replace the defective fan. (FM14 / FM15 / FM16) 6. Replace CUDB. 7. MFPB ICP14E conduction check 8. Replace MFPB.

Turn off sub power switch not the main! Then press 2 and 5 and turn on the sub power switch which puts you in MODE 25 select #5 Password setting. Then select #1 key operator setting. Default might be 9272.

• As the title says, we have a 190F which shows out of toner. Have replace toner cartridge (often), main board and both sensors that detect toner in the cartridge, has anyone else had this on this lovely machine!

• Every new toner contains a little fuse (it is under two tiny contacts). When the user put the new toner into the printer, the fuse blows and the printer detects in this way that it has a new toner in; so if the toner has been for any reason only a moment into the printer cannot reset the message of add new toner.
• You can test the continuity between the contacts.

Solution A: put in a brand new toner and use the other(s) first of the natural end (so the message is not yet displayed) Solution B: find a pico fuse of the same value and put it place. (if you are a tech you know the value, it the same in fuser or TBU ). Aldo

if u installed ADF on Ur machine then check the ADF feeders if not .. then check scanner Assembly

Enter service mode -counter- parts couner-new release-select fuser-open front door-press start button. Exit technical mode. Good luck

Code does not show in the service manual correct code and model????

Does it copy? Did update the firmware after installing the new board????? Was it gotten from Konica Minolta???

Have you checked the default setting in control panel for that printer?

Try pull up error

2. Failed fuser lamp(s). Check continuity of the three upper fuser lamps L2, L3 and L4. Check the operation of the three upper fuser lamps in the Service Mode by following the steps below. Replace failed fuser lamp (p/n A03U M31E 12 for bizhub PRO C5500/C5501/C6500/C6500P/C6501/C6501P/C65hc and p/n A1DU M31E 00 for bizhub PRESS C6000/C7000/C7000P/C70hc/bizhub PRO C6000L). a. Press Utility/Counter. b. Press "Stop 00" "Stop 01" to access Service Mode. c. Press State Confirmation. d. Press I/O Check Mode. e. Enter code 45 using the numeric keys. f. Press Access to enter multi mode 11 (L2). g. Press the START key. Verify the lamp comes ON. h. Press the STOP key. i. Press "C" key to enter another multi mode. j. Repeat steps 6 through 8 for multi mode 12 (L3) and 14 (L5).

Sir, Power off the machine. Then remove the toner bottle, be careful the hole might be on the bottom and the toner is going to go everywhere. Then close the toner cover and turn on the machine. Let the machine go through it normal routine. When it asks for toner install the toner bottle correctly. If that does not work, you might have a bad motor or the home sensor or actuator for the toner bottle is bad worse case the control board is bad. Does it say image unit or drum????????

Verify and clean the paper passage rollers and inspect the actuator.