My printer Konica Minolta bizhub 165e
There is no 'ee102'. Call for Service.
C5
102
Description: Main motor malfunction • The main motor (M1) lock signal remains HIGH for a continuous 1-sec. period at any time 1 sec. after the main motor has started turning.
Causes: Main motor (M1) Printer control board (PRCB) DC power supply (DCPU)
Remedy: 1 Check the connector between M1-PRCB CN6 for proper connection and correct as necessary. 2 Check M1 for correct drive coupling and correct as necessary. 3 M1 operation check. PRCB CN6-7 (LOCK) 9-D 4 Change PRCB. 5 Change DCPU.
CC
102
Description: Controller - engine connection failure • The engine control system can not communicate with the controller.
Causes: Printer control board (PRCB)
Remedy: 1 Turn OFF and ON the power switch. 2 Change PRCB.
https://www.google.com/search?q=Konica+Minolta+bizhub+165e+error+code+ee102
..
I have a Konica Minolta Bizhub 283.
Question edited into English.
This is professional full size business machine, stop playing Service Technician and call in Minolta Service .
Service mode 92729272 password not working
Okay. That is a KM code. I need more detail to answer your question. for instance, model #, and why do you feel you need to get into service mode? If you don't know where you are going and why you are going there, there is plenty of buttons and bits that can cause further issues with your machine.
Need to change scan to email address on Konica Minolta Bizhub C351
This could be related to your browser. One way to find out is to try the page on a different browser. Some other options are Firefox and Chrome. If it works on a different browser and you would like to continue using your original browser then you could try and clear the cache on the browser and try again.
Which browser are you using and have you tried a different one?
Let us know and I hope it works for you soon.
Service call C0650
Error code C0650 Konica Minolta bizhub 160 Black Faulty scanner homeposition sensor.• The scanner home position sensor (PS100) does not gofrom HIGH to LOW when the scanner motor (M4) is energizedfor a given number of steps after the sequence tobring the scanner back to its home position has beenstarted at the end of a scan motion and during re-shading.• The scanner home position sensor (PS100) does not gofrom LOW to HIGH when the scanner motor (M4) is energizedfor a given number of steps after a scan motion hasbeen started at the end of a PS100 home check scanmotion and during re-shading.THANK'S
Not finding what you are looking for?