Konica Minolta Recent Questions, Troubleshooting Help & Support

I need to be able.to.fax on my machine

(40020001)Internal 1.

that code is not listed anywhere. https://www.google.com/search?q=C1070+printer+error+code+c-4526 ..

My printer drypro model 832 is giving me an error 4122 what should i do the hospital is stuck,my email address is [email protected] please help.

Image unit motor failure. Replace the image unit. Or the gear pack for the motor or the Motor worse case its the main control board.

Go on line purchase a new waste toner box and replace it you can also dry to vacuum the box out. but watch what you use as a vacuum clear as older ones don't have the best filter and toner can run strait though it making a mess

Remove the paper behind the paper draws

Sir/Mam,Recommended you have a technician come out to re flash the copier operating system (NOT printer driver). But the software that runs the copier, it is located at a secure web site at Konica Minolta, any firmware is access able to dealerships and KMBS only. They like to protect their copier Operating Systems.

Replace the image unit which includes the drum and developer and ensure clear drum and developer counters and you run the F8 procedure.

What is the model of the machine?

https://www.google.com/search?q=Konica+Minolta.+Why+doesn%27t+the+blade+clean+the+magenta+after+printing+color ..

Can you please describe the actual problem otherwise we can't help you.

it needs service, cleaning, head clean mode. a full cleaning service is need, call and get some from makers site?

remove the hard drive.

Replace the cyan toner cartridge but more then likely your cyan developer unit is bad or the cyan hopper is not feeding the cyan toner into the cyan developer unit. The hopper is what the toner go into. When you pull the toner out that hatch you see well below it the hopper that is where toner goes before getting into the developer unit.

no such code in the service manual Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

2.6.19 C0096: Image Transfer Belt pressure/retraction failure
2.6.20 C0098: Fusing Pressure Roller pressure/retraction failure
Relevant Electrical Parts
1st Image Transfer Retraction Position Sensor (PC12)
1st Image Transfer Pressure/Retraction Motor (M11)
Control Board (PWB-MC)
Step Action
WIRING DIAGRAM
Control Signal
Location
(Electrical
Component)
1
Check the M11 connector for proper connection
and correct as necessary.
— —
2 PC12 I/O check PWB-MC PJ3MC-6B (ON) 6-B
3
M11 operation check PWB-MC PJ5MC-1~4
(Pulse Output)
6-C
4 Change PWB-MC

Hi Lamgharni. see if this link helps you out. https://www.google.com/search?client=avast-a-1&sxsrf=ALiCzsbsfZD9VC3fdb5LnZ52HiY_jk_Pug:1663026260251&q=konica+minolta+bizhub+c3350+won%27t+print+colour&spell=1&sa=X&ved=2ahUKEwie7_nLt5D6AhUuQEEAHdOxA3gQBSgAegQIARA2&biw=1536&bih=714&dpr=1.25

Question edited for clarity. Question moved from MISC. lots of videos and info, https://www.google.com/search?q=Konica+Minolta+Bizhub+C252+-+Copier.+It+displays+a+message+%27replace+fuser+unit%27+and+%27replace+transfer+unit%27. ..

Konica Minolta Bizhub C266 MFP PCL6 Driver 7.2.0.0 so what PC is it.? non told what OS on PC windows 7 to 11? connected via USB?????? that means the PC driver is bad, wrong or missing In what country are you. the UK drivers are at makers sites, but sites are by country so... why not ask maker for direct support and not use virus infected drives I see google finding endless now. direct from them on there specific website for your COUNTRY UK https://www.konicaminolta.co.uk/en-gb/support/customer-support