Konica Minolta Magicolor - Popular Questions, Answers, Tips & Manuals

Question edited for full 'make model (what it is)'. Question moved to make model category. See if there is a broken piece sitting in the bottom of the machine. It is small enough that you can turn it upside down and shake it. All machines have some type of guide rail and a positive lock at the end. https://www.google.com/search?q=1600w+printer+toner+cartridge+loose ..

Reboot the printer. This often clears the service message, and printer operation can resume. If the problem persists, contact Technical Support. https://www.konicaminolta.com/?_ga=2.925553.1712686740.1643574641-1075806822.1643574641

https://www.google.com/search?q=Konica+Minolta.+Why+doesn%27t+the+blade+clean+the+magenta+after+printing+color ..

The second transfer roller might be missing. Is not properly installed. If you open the printer you will see a roller made of sponge like material. That is the second transfer roller. Replace it if above does not work also ensure the transfer belt is properly installed. that is across from it in the machine.

If it got jammed in the fuser unit (the hot part) the fuser can come out as a unit then remove the media wad

Fuser problem

check the tray one paper empty senor blow out with air is the paper acturator broken that the device that would lay on the paper when its out of paper the sensor will drop far enough to tell the printer tray one is out of paper miss feed are the rollers are dirty and or need to be replaced Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

If you have not already done so, unplug the machine wait 30secs, plug it back in and start.

It may be a yellow drum problem if is just doing it with yellow

replace the Yellow magenta and cyan image units Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

YES

replace the fuser unit Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

Self Help Product Support Konica Minolta Business Solutions Inc try this Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

Might be the senor that bottle acturates is bad or has toner on it!!! clean the sensor Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

Are these third party toner cartridges? if so replace with KMBS cartridges

Model number would help

Replace the toner cartridges with OEM toner

What OS do you have on the computer?

http://geiohio.com/remove-blank-page-konica-minolta

will print??? or the paper not coming out of the draw does it work using the bypass tray??? Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f