Konica Recent Questions, Troubleshooting Help & Support

Main Motor failure check the image unit and or the paper draws or you have a bad motor worse case the main control board Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

Firmware is only available thru a secure konica minolta web site must have a tech do it. Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

Model setting is incorrect the machine thinks ita KonicaMinolta Bizhub when its really set to be a Bizhub 219, 21 or 23 page per minute machine. Get tech out to go into service mode change it to what it really is. Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

Fuser error the hot part Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

TRy 9272 or 92729272 Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

Remove the cyan (Blue) image unit. shake it along its axis. Are using 3rd party toner and image units replace with OEM. Open close front door to reset. Replace the image unit Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

Incorrect media check to ensure the media is set for Metric I assume not inch for USA. Check your print driver for proper media settings metric versa inch Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

another yellow image unit was use to check the operation of the yellow image. The machine was set to prevent the new image unit from being consider old once it was pulled out. Have a tech reset the machine properly Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

Fuser need to be replaced. HOT Part. or a previous paper is wrapped around the roller in the fuser remove the fuser and see. Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

Take no more pics until you've recovered your photos, take the card out of the camera. This is to reduce the chance of you overwriting some of your "lost" photos. There are many good freeware photo recovery software options that may help you recover your photos. This article reviews and outlines several of the better ones:

Buy another SD card and insure the memory size of the new card is compatible with the camera... some cameras are very limited in the size of cards they can read.

SD cards can fail. # years on a SD card may be all you'll get. Try another card to see if you can record pictures on it. If so, then the card has gone bad. If not , then the camera needs a repair shop.

try this site Self Help Product Support Konica Minolta Business Solutions Inc Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

try this site Service manuals electronic components datasheets and equipment schematics... Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

try this site. The Konica Minolta web site no longer has this manual. Service manuals electronic components datasheets and equipment schematics... Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

Image control board failure or the firmware for the copier crashed. Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

Have a technician come out and clean the paper path and check the drum area, also the fuser the hot part Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

Fuser unit replace it. Fuser is the hot part! try this site for parts Precision Roller Printer Toner Cartridges Parts and Supplies Office... Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f