Kohler Popular Questions, Answers, Tips & Manuals

get it from a Kohler service agent spares

It takes new valve cartridges and sometime complete valve bodies. Call Kohler, it should be covered by their lifetime warranty. They are very good about service.

You need to repair your locked rotor then it will work

Check the flapper and seat. Ensure that the flapper chain is not tight or caught underneath flapper. Check floor underneath tank for any sighs of water leaking or seeping from tank. tight tank to bowl nuts. good luck

KOHLER Touchless Toilet Flush Kit 1954 0 The Home Depot It might be better to replace flush mech. The Price is about $40.00

Probably some pipe rust clogged the exit. If u have pretty low pressure on one or both, hot and cold water, try keep force closed by hand the water exit at shower pipe, then start both cold and warm water gradually as much as u can keep it closed with the hand.The pressure of the water will try "escape thru the clogged pipe and hopefully unlock that debris or rust!The hot water pressure going back thru the cold water pipe might unclog that debris.Just a simple fix which many times works as a charm..Otherwise if this is not fixing, try close both water from main service valve. Then unscrew the secondary shower valves and manually clean them or replace if very damaged.

without knowing what type of equipment (make and model and year installed), it could be quite difficult to give a competent answer to your question.

kohler bancroft is the sink manufacturer, not the faucet mfgr. do you have a clue what faucet mfgr it might be?

I just watched a you tube video. It looks like you have to loosen the cone shape at the base of the handle and the whole handle will come off. Hopefully this helps.

You will have to hold the flywheel for removing the clutch. It may require removing the blower housing. I use an impact wrench which loosens the bolt w/o holding the flywheel. It's 99% a regular bolt (turn ccw to remove) since left hand threads cost more to buy the bolt and tap the hole and small engine stuff is made as cheaply as possible.

maybe this what you wanted you , Service Kit Kohler Marine Generator Models 4EF 5E 6EF 7.3E Maintenance Service Kit Kohler Marine Generator Models 4EF 5E 6EF 7 3E

Smart-a$$ answer is to find an old 3 gallon pot in a salvage place. Best answer is to fiddle with the chain that goes from the handle to the flush flapper and see if adjusting its length makes a difference. If it's too short it might result in letting the flapper closing too soon and allowing your deposit to remain.

i don't know about your toilet but i googled it and found this it's the flapper and flush valve https://www.plumbingsupply.com/images/kohler-flush-valve-1044458.jpg and you can go here and see all the parts in it,hope this helps you out. https://www.plumbingsupply.com/kohlertoiletparts-cimarron.html

Standard size is 2 inch

try typing in google might come up with help

THAT DEPENDS ON YOU'R WARRENTY.HOW MANY TIMES CAN YOU BRING IT BACK AND IF YOU USE IT THE 2 TIME IT MIGHT GET WORST AND YOU'LL BE WITH OUT A GENERATOR FOR A LONG TIME MAYBE,I WOULD ASK THE PERSON IF I CONTINUE HAVING THE SAME PROBLEM CAN I BRING IT BACK AND GET A REPLACMENT..REMINDER GO TO YOUTUBE AND TYPE [ what can I do with ALTINATOR you might like? ]

the swivel on any tap has an "O" ring or seal at either side of the outlet into the arm Any leaks from this area indicate a ring/seal failure

Kohler K-79402-CP aerator kit Kohler K-78250 Kohler 1001100 You might try to replace aerator on end of spout if water is leaking around it, or you might try to replace cartridge. VALVE (CORALAIS AND FAIRFAX) K-GP77548 $14.80 List Price Call Kohler if you need more info.

Try adjusting the float so your tank gets more water.