Kodak Logo

Kodak Popular Questions, Answers, Tips & Manuals

Do you work here? Claim your company

  • 1K Products
  • 103K Answers
  • 3M Views


Tony Parsons Feb 23, 2019
Look it up in the manual - probably a menu command
Google IT

Kodak EasyShare... | 36 views | 0 helpful votes


Take the unit back apart and examine it very carefully to be sure you did get all the debris out of it and that you did reassemble it correctly. There could be something loose that is dropping down into the light channel or your other slides may not be aligning correctly causing a short light interference. I hope this helps.

Kodak Carousel... | 29 views | 0 helpful votes


Measure the internal diameter at the front of the lens. If it is between 48-58mm I think you will find a suitable alternative replacement on Amazon, or pop it into a local photographic shop.

Kodak Cameras | 28 views | 0 helpful votes


Take out the sc card ,see if it will then start up,if it does replace sd card

Kodak Cameras | 139 views | 0 helpful votes


See previous response, please

Kodak Cameras | 38 views | 0 helpful votes


Hi
Please see the suggestions below which hopefully get the camera working again
1. Have you tried a fresh set of alkaline AA batteries? If so have you tested these batteries in another device so you know they are good?
2. Have you checked the battery compartment terminals and battery bay door terminals are free from corrosion?
3. Check all the buttons on the camera to ensure they are moving freely. If some dirt gets jammed into one of them it can make the camera think the button is being pressed and it will not allow the camera to switch on.
I hope one of these suggestions helps to get the camera up and running again.

Kodak Cameras | 44 views | 0 helpful votes


Try Kodak support site, or else Google it

Kodak Cameras | 34 views | 0 helpful votes


Which particular model of Kodak camera had you in mind ?

Kodak Cameras | 14 views | 0 helpful votes


There are two possibilities, one not so bad and one not good, at all.
The first thing to try is to clean the battery terminals in the camera. This can be done by CAREFULLY scratching them with a small flat screwdriver, tweezers or similar to remove any corrosion or film. Contacts can look clean, but still not connect.
The other problem, which you will not be able to repair yourself, could be the main fuse or a capacitor within the camera. That requires special technical skills to repair, including taking the camera apart and working on micro-electronics.

Kodak Cameras | 46 views | 0 helpful votes


I will assume you have this unit tied in to a computer unit. If so try to delete the program on the computer and do a complete reinstall. Follow each guideline on the computer screen and check on your programs on your computer to be sure the printer is listed. If it is listed run a compatibility test on the computer and printer. Your computer may not be recognizing the printer but it should give you an option to choose how to run the printer program. Be sure when you are deleting the program that you completely delete all parts of the printer program. You will most likely have to enter the WIFI pass code to the printer for it to recognize the computer and WIFI number pass code. I hope this helps.

Kodak Office... | 18 views | 0 helpful votes


SOUNDS LIKE A WEAK BATTERY TO ME

Kodak Cameras | 36 views | 0 helpful votes


Click the Start button on your computer.
Access the Control Panel and choose Add or Remove Programs.
Choose Microsoft Office Professional Edition 2003 and select the Change button.
Tick the checkbox of Choose Advanced Customization Of Applications.
Go to Office Tools and select Microsoft Office Document Imaging. Click Scanning OCR --> Indexing Service Filter.
Click Run and install the features you want from the Office Installation CD.
If the problem persists, remove the malware program on your computer.

Kodak Office... | 71 views | 0 helpful votes


Hello,

1, If there is an issue with one part of the scanner, it won't trouble you with multiple problems. I would suggest you update the firmware for the device from the manufacturer's site with the model number.

2, Even after updating the firmware, if the issues are not resolved, check if the scanner driver's version is obsolete. If so, uninstall the current driver and reinstall the updated one, which should help.

Kodak Office... | 38 views | 0 helpful votes

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Kodak Experts

Marvin
Marvin

Level 3 Expert

84027 Answers

Brad Brown

Level 3 Expert

18002 Answers

Andrew Taylor
Andrew Taylor

Level 3 Expert

25819 Answers

Are you a Kodak Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...