KLH Televison & Video - Page 3 - Popular Questions, Answers, Tips & Manuals

OOOOh from which remote? brand and model please!!!

0765 & 0156. Also 0767. try these.

Hello lesliecascia.

To better assist me in solving your problem , please attach , as a comment , the make and model of this dvd player.

Does the unit have power available?
(Blinking light of it is a PC DVD player when starting your computer)
(Display is showing anything on a home entertainment system)

If this is a computer drive , follow these steps if you feel comfortable doing so. Disconnect your computer from its power supply before doing so. Do not perform these steps if the unit is under warranty.

1. Remove you drive by opening your case and removing the four screws supporting it.
2. Open the case by removing the four or six screws on the bottom of the unit and gently pull back the sheet metal case away from the case side.

Now you should see something like this




Now remove your CD and reassemble the drive and it should work correctly assuming that the only problem was a "cd-jam"

If the unit is a home entertainment system , do the following steps :

1. Remove all power from the unit and unscrew the sheetmetal casing. The player will look like this inside.
2. Remove the two/four screws holding the cd on the top of the reader assembly. See image

Remove the cd/dvd causing the jam and re-assemble the player and it should work fine.

There are other reasons why this unit will not open , but this is the most likely reason behind simply being blown.

Please feel free to contact me if you need more information.
Regards
Stephan

what make is your tv u still got insurance on it

can you get in the menu screen with the built in buttons on the TV? if yes then go to menu, go to tuner, select antena or cable, and scan.

the preset password is 3308. but first goto set up menu select rating press enter/play, select rating agin press enter/play, chose rating you want, then enter password 3308, press set-up to exit, press enter/play to start.

Call KLH. You'll need the player's model number;

1-818-767-2843 extension 117 (customer service)
8:30 AM to 4:30 PM PST

000 or 123 if not im sorry

press and hold menue button on the tv, for more than 10 seconds to unlock

Yes, yoke plug in should be next to or behind FBT.

Hi and welcome to FixYa,

As antiochpc has initially proposed, clean the lens. This could be performed by using a cleaning disc. Should this be not corrective, then the top cover should be removed and the laser optics manually cleaned using cotton buds. it may also help spraying the mechanism with a can of compressed air to remove dirt and other debris.

Additionally, could be a mechanical problem. The carriage (where the laser optics ride) couldnot traverse its route. Most likely dried up lubricant on the sliderbar. This would be the small shafting thatguides the carriage of the laser pickup. Dirt, grime, dust andsolidified lubricant can cause stoppage of the carriage and the lasereye then fails to read the next track.



Check and perform preliminary visual or necessary inspection. Pls post back result(s). Good luck and Thank you for using FixYa.

Go back to main menu, there you have the option of what language to select from.

i need the code

Hi,

Appreciate the direct "Ask Me".

To my knowledge, a KLH DVD8350 is only a player, it has no recording capabilities, sorry.

Hope this be of initial help/idea. Pls post back how things turned up or should you need additional information. Good luck and kind regards. Thank you for using FixYa.

Hi,

Initially, a couple of ideas:

• check the cables from the DVD to the VHS to the TV (I am assuming that the sound is likewise connected to the TV and not to a home receiver system or an amplifier);
• I am assuming again that you are using RCA and not RF, if yes pls pay special attention to the yellow RCA on both the DVD to VHS and VHS to TV;
• diagonal roll often indicates a loose ground or a defective cable/RCA connector;
• verify settings/configurations in all three; DVD, VHS, TV. TV should be set to AV or Video, VHS likewise to A/V INput;
• try playing a known good VHS tape, if normal playback, problem is between DVD and VHS, if likewise no video, problem is between VHS and TV.

Hope this be of initial help/idea. Pls post back how things turned up or should you need additional information.

Good luck and kind regards. Thank you for using FixYa.

Remove the cover. push the lense out ward with your finger. Clean the lense with a q-tip soaked in eye drop fluid or rubbing alcohol. Wipe it dry with the other side. Mine works great now

Dear fensbowl,

We wanted to find out if you still need a solution for the KLH DVD8350 DVD Player Problem you posted on FixYa yesterday.
In case you do, we'd like to offer you our Premium Assistance Plan
By using this plan, your problem will be addressed by a group of Elite Experts who can provide you with professional assistance and often solve your problem.
Click here for more information about this plan.
If you already solved this problem, Click here to tell us how you did it.

Regards,

The FixYa Team

I need help from you guys. Why are you asking me for the answer! This is much more toned down from the original letter I wrote on here. Help me for free and dont try to make a buck on me if I give you a solution so you can sell it to someone under a premium package!

remove cover. move lense outward with finger. Clean lense with rubbing alcohol or eye drop fluid. Wipe dry with other end. Works great now

Hi,

My sincerest apologies. I was not made aware that you posted a direct request for assistance. It was only by chance that I saw your post.

To your concern should you still require information; most units would have a yellow, red and white connectors commonly called RCA. What is required then is a triple RCA to RCA connector as shown below. The yellow is normally connected to the video, while the red & white are for the R & L of the audio. An identical set would be on the rear of the TV unit henceforth the connection would be OUT from the KLH DVD 221 to the IN of the TV.

In some instances, a single cable is used to connect some models to the TV. This is called an RF patch cord and would look sonething like below. This would come form the RF OUT of the player to the RF/CABLE/ANT IN of the TV. Pls make sure that the style/form fits your units.

Hope this be of initial help/idea. Pls post back how things turned up or should you need additional information. Good luck and kind regards. Thank you for using FixYa.

I can't remember how to play dvd's on by dvd player.