KLH Televison & Video - Popular Questions, Answers, Tips & Manuals

It might be this one: https://www.klhaudio.com/ Some extra info here as well: https://en.wikipedia.org/wiki/KLH_(company)

If the Visio TV has more than one input, don't forget to use its remote to make sure the correct input is selected. It probably wouldn't hurt to put a DVD into the player, confirm its running from the front panel counters) and let it keep running as you troubleshoot. At least then you'll know there is an active video source once you find it. Another thing you can try is to put in a music CD, if the player accepts these too (most do). Then when you get the TV set to the right input, at least you'll hear music, and can then go back to trying a DVD. I know you're using component video, so remember that unlike HDMI devices, the TV is unable to switch to the correct source automatically. So it may just be that you've never had to switch the TV's input source before. Good luck! :-)

Hi, you must check the user guide to find fuse rating or check the blowed fuse for current rating, for a DVD/Bluray player it could be about 2A /120V AC..

get better cables and connect in the same row

If you wish to get some details; check the site linked here. Pull up older posts. Surf the site with patience. http://electronicshelponline.blogspot.com/

hi there try this link they can help you http://www.telefunken.com/service/

You should have its remote control to select the inputs. If you wish to buy its original remote control, contact the authorized service centre, or authorized dealer to your device brand. They can either give you a genuine remote control to your device, or can direct you, from where can you purchase a suitable one. To select a proper universal remote control, you should know about the number of digits to its set-up codes. There are 3 digit, 4 digit, 5 digit, 2 digit and even single digit codes, to some brand devices. After confirming this, check the sites linked here. Both the sites have set-up code list and set-up procedure to many popular brand remote controls. Check which brand remote control has set-up code/s to your device brand, and buy that one according to availability? Brand name of the remote control isn't a matter, but it should have set-up codes in its code list, to the device brand you have. Please note: Every new universal remote control will have set-up code list, and set-up procedure along with its pack. Never accept a remote control, that hasn't both of this. For more details about the set-up codes, visit the site http://electrohelponline.blogspot.com/ Check this site too. http://remotesearch.blogspot.com/ Type in the brand name of your device in the search box, and press "Enter". Universal remote controls are available at most of the electronic spare part selling shops.

If you wish to get some details; check the site linked here. Viewing it in "Mosaic" or "Magazine" will make surf easy. Pull up older posts. Surf the site with patience. Do a search by type in the brand name of your device at its search box and press "Enter". http://electronicshelponline.blogspot.com/ Unlock procedure to many popular brand TVs are given.

What sort of tv do you have?

I do not own a blue ray player but my son has a PS3. The thick cable is most likely HDMI and it should work without the red/white sound cable...try unplugging them so the auto detect feature if available and activated is not trying to compete by finding 2 sources. If that works great! If not, you can get a yellow RCA for the video and just use those as a source - again, don't use the HDMI cable and try it. If you don't have a yellow RCA, I've used another red or white for video testing to see if I can get a video feed. Most newer red/white cable will pass a video signal just fine and are only color coded for ease of hookup.

The TV is locked by anyway. If you wish to get some details; check the site linked here. Viewing it in "Mosaic" will make surf easy. http://electronicshelponline.blogspot.com/

Hi there! My name is Kimberly and I form part of the Social Media Department with DISH. It is my pleasure to assist you today and provide you with information that may be helpful to you. Where you trying to address the remote to the TV or a different device? With the *desired equipment* on, press and hold the *desired mode* mode button (about six seconds) on the top of the remote until all mode buttons light up, then release. Press 0-TV/1-VCR/DVD/2-Other, then press STAR Press the Up arrow button once per second while pointing the remote at the *equipment*. If the code for it comes up, the equipment power off. When it does, press the POUND button. If the code entered is valid for the remote, the mode light will flash three times. To verify the code works try several different functions for that equipment.If you have additional questions visit http://www.mydish.com/support/program-to-tv-scan-non-basic?WT.svl=leftnav or contact me directly at: [email protected] Media RepresentativeDISH L.L.C

Standby means just that---all these and TV sets have a standby power supply that runs 7/24 when unit is plugged in---if a voltage is wrong or missing it will not allow or be able to come full on..

There are three coloured leads on the back of a DVD player if you use composite video - Red is Right channel sound, white is Left channel, yellow is video.Red from DVD right output to TV right inputWhite from DVD left output to TV left inputYellow from DVD video out to TV video in

I just had this issue and nothing worked! Then I pressed the "on demand" button on the ATT remote and the tv turned back on!! Hope that helps!

plug it in hook the wires up hit the arrow button that will open it upput the disk in and it should work

try to download manual on www.retrevo.com.

Code for KLH is 0214. Gerald

how to hook this up to a receiver

The video processing circuits are not functioning fully and are blanking out part of the video. This is a highly intergrated area in the player and is not costwise to repair since you can get another player (used) for $20 to $25 with doing a google search. A new one is not available.