KLH Popular Questions, Answers, Tips & Manuals

Yes, the 10-120 can use a L & R low level subwoofer input. You can get a short 6" RCA splitter adapter from Radio Shack for a under $10. (1 female input, 2 male outputs) Alternately, just plug the subwoofer output on your receiver to just the low level R channel on the KLH sub.

Most likely the amp in the sub has blown. It will need repair or replacement. I'd take it to an expert in repairing amps, it's not a job for you unless you're experienced in troubleshooting these things.

If you wish to get some details; check the site linked here. Pull up older posts. Surf the site with patience. http://electronicshelponline.blogspot.com/

Hope this helps. http://www.d-s-t.com.au/data/Misc/S100ETH-Instructions.pdf

at every online electronic store

Yes, probably, if you aren't capable of repair yourself. However, IMHO, a replacement will probably cost less in the long run. I have a KLH passive subwoofer myself. I wouldn't pay for any repair if it failed. Replacements are far too inexpensive.

Try new cables.Connect a different speaker at low volume to confirm there is no power.My first guess is that your amp needs help.

hi there try this link they can help you http://www.telefunken.com/service/

Wire what exactly. Which set of KLH speakers have you got?

Yes... At best it may be just a loose mechanical fixing component or foriegn object :)

You can't, unfortunately. Bizarrely, the system doesn't have any inputs, only outputs. There's no way to get a signal from the TV into the system. There's plenty of Amazon reviews calling this cheap junk. I'd be forced to agree.

You should have its remote control to select the inputs. If you wish to buy its original remote control, contact the authorized service centre, or authorized dealer to your device brand. They can either give you a genuine remote control to your device, or can direct you, from where can you purchase a suitable one. To select a proper universal remote control, you should know about the number of digits to its set-up codes. There are 3 digit, 4 digit, 5 digit, 2 digit and even single digit codes, to some brand devices. After confirming this, check the sites linked here. Both the sites have set-up code list and set-up procedure to many popular brand remote controls. Check which brand remote control has set-up code/s to your device brand, and buy that one according to availability? Brand name of the remote control isn't a matter, but it should have set-up codes in its code list, to the device brand you have. Please note: Every new universal remote control will have set-up code list, and set-up procedure along with its pack. Never accept a remote control, that hasn't both of this. For more details about the set-up codes, visit the site http://electrohelponline.blogspot.com/ Check this site too. http://remotesearch.blogspot.com/ Type in the brand name of your device in the search box, and press "Enter". Universal remote controls are available at most of the electronic spare part selling shops.

If you wish to get some details; check the site linked here. Viewing it in "Mosaic" or "Magazine" will make surf easy. Pull up older posts. Surf the site with patience. Do a search by type in the brand name of your device at its search box and press "Enter". http://electronicshelponline.blogspot.com/ Unlock procedure to many popular brand TVs are given.

Find the "Sub Out" connector on your TV. Likely an RCA jack. Run a cable from the TV to the Sub's Input and you're done. If your TV doesn't have a Sub Out then you might be out of luck.

The mech binds up for age and lube hardening. Take it apart clean and relube it or have a pro like me do it for you. Larry 916-362-8708

There is a small plastic plug just above the power cord. Remove it to find the fuse. http://product-images.highwire.com/4442801/6385-5.jpg

What sort of tv do you have?

I do not own a blue ray player but my son has a PS3. The thick cable is most likely HDMI and it should work without the red/white sound cable...try unplugging them so the auto detect feature if available and activated is not trying to compete by finding 2 sources. If that works great! If not, you can get a yellow RCA for the video and just use those as a source - again, don't use the HDMI cable and try it. If you don't have a yellow RCA, I've used another red or white for video testing to see if I can get a video feed. Most newer red/white cable will pass a video signal just fine and are only color coded for ease of hookup.

It could be just a lead, check your lead heads and inserts are clean. Check along your leads and wires for any obvious kinks / tight bends / cuts / nicks / something sitting down on it or any damage to the wires. It could be there is another electrical device nearby interfering at a electromagnetic level. It could be just the dials / knobs need taking off and cleaning in behind. the pickups, you may not need to remove them just spray with electronic cleaner this stuff is great for lots of different electrical cleaning problems. Good luck

The TV is locked by anyway. If you wish to get some details; check the site linked here. Viewing it in "Mosaic" will make surf easy. http://electronicshelponline.blogspot.com/