KitchenAid Food Mixers - Page 5 - Recent Questions, Troubleshooting & Support

Hiya, I am sorry to hear you are having trouble with your mixer. I have added below a link which is a help video on setting the correct speed on your mixer: https://www.youtube.com/watch?v=bM3t46afGcc I hope this video helps you to resolve the issue :)

Hiya, It sounds like you need to adjust the head height on your mixer. I have added a link below for our help page on adjusting your mixers head height. https://www.youtube.com/watch?v=bmg8SVldZbs I hope this helps you :)

Hiya, Sorry to hear you are having trouble with your mixer. It may be that your motor brushes are worn down or have been put in incorrectly. I have added a link below for our help page on replacing your motor brushes: https://www.youtube.com/watch?v=5YuS3atXR0M I have also added a link below if you wish to purchase a set of new motor brushes: 6778011 KABrushSet KitchenAid Mixer Motor Brush Set (2 x W10380496 brushes) https://secure.kaparts.co.uk/sku/6778011 I hope this helps you :)

Hiya, I am sorry to hear you are having problems with your lever. I have added a link below for our help page on replacing your speed lever: https://www.youtube.com/watch?v=y97KT98vpJ0 I have also added a link below if you wish to purchase a new speed lever: 9709276 KitchenAid Tilt Head Stand Mixer Part (also 5qt bowl lift) Speed Lever Black https://secure.kaparts.co.uk/sku/9709276 I hope this helps you :)

Hello there, We do provide a conversion kit to assist you with your job. Please see below the link for your perusal: KSM150CONVUK KitchenAid Conversion Kit for KSM150 to 220v/230v/240v with UK Plug https://secure.kaparts.co.uk/sku/KSM150CONVUK

Hello there, Sorry to hear you are experiencing an issue with your appliance, it sounds like you might need a new tilt lever. Please see below the help video for your perusal as well as quote for a replacement one, should it need replacing: 4176024 KitchenAid Lever-Latch Black was 9709280, 9709267 tilt https://secure.kaparts.co.uk/sku/4176024

Sorry to hear you have an issue with your appliance. If you have the KitchenAid Tilthead mixer, please see the link to help page below that will, hopefully, assist you in resolving the issue you are experiencing: https://www.kaparts.co.uk/Help/KitchenAidHelp/KitchenAidMixerHelp/HeadofMixerBouncingorWobbling/tabid/659/Default.aspx

The Service Manual can be found at: http://www.kitchenaidparts.eu/documents/pdf/service-manual/classic-svc-manual-new-email-version.pdf Bowl height starts at page 27

Raise the head and adjust the screw that is now exposed from the front over the top of the bowl where the head hinges on the pedestal. Screw out to raise the head up.....anti clockwise.

Adjust the head height, tilt the head back and look into the hinge area from the front over the top of the bowl. Undo that slottedscrew you can see in the middle of the hinge a quarter turn at a time until it stops scraping.

Tilt the head back and look into the hinge from the front. There is a screw right in the middle, turn it anti clockwise a quarter of a turn at a time until the whisk stops tinging on the bowl.

There is a problem in the planetary, there is wear or lack of lubrication causing wear in something in that area. Replacing the planetary is not a big or expensive job.

The screw under the head is for adjusting the head height for when the standard paddle and bowl are being used. First tip the whole machine upside down and tighten the hinge pin screw right up inside the pedestal post. Next reset the head height with flat paddle. Screw in is head down, screw out is head up. You want the paddle to just stop tinging the bowl on high speed.

If the base is not holding the bowl properly then only a replacement base plate or another bowl is going to fix it. The base plate is held onto the pedestal with 3 Philips head screws.

Check that you have put the carbon brushes in correctly, they are "keyed" on one corner so will only work one way. Look in the hole with a torch to see the blocking corner in the bottom.

Hiya! I have added below some links on how to replace your speed lever. I have also added a link to purchase a new speed lever if you wish: 9709276 KitchenAid Tilt Head Stand Mixer Part (also 5qt bowl lift) Speed Lever Black https://secure.kaparts.co.uk/sku/9709276 https://www.kaparts.co.uk/Help/KitchenAidHelp/KitchenAidMixerHelp/Howtoreplacethespeedlever/tabid/643/Default.aspx https://www.youtube.com/watch?v=y97KT98vpJ0 I hope these help you!!

Hiya, I have added below some links of our help videos on replacing your tilt lever on your KitchenAid. I have also added a link to purchase a new tilt lever if you wish: 4176024 KitchenAid Lever-Latch Black was 9709280, 9709267 tilt https://secure.kaparts.co.uk/sku/4176024 https://www.kaparts.co.uk/Help/KitchenAidHelp/KitchenAidMixerHelp/ReplacingyourTiltHeadleveronyourKitchenAid/tabid/660/Default.aspx https://www.youtube.com/watch?v=fTh56wwO-uY I hope this helps you :)

Hiya, I am sorry to hear you are having an issue with your machine! To solve this problem, you will need to remove the drip ring from your mixer and give it a good clean, this should stop the grease leaking. I hope this helps you! :)

Hiya, I am sorry to hear you are having problems with your KitchenAid mixer. It may just be that your motor brushes are worn down or have not been put in correctly. I have added links below for our help videos on replacing the motor brushes and have also added a link if you wish to purchase a new set: 6778011 KABrushSet KitchenAid Mixer Motor Brush Set (2 x W10380496 brushes) https://secure.kaparts.co.uk/sku/6778011 https://www.kaparts.co.uk/Help/KitchenAidHelp/KitchenAidMixerHelp/KitchenAidMotorBrushReplacement/tabid/597/Default.aspx https://www.youtube.com/watch?v=5YuS3atXR0M I hope this helps you solve the issue :)

Hiya, I am sorry you are having issues with your mixer!! I have added links below for our help videos on adjusting the speed settings which I think will help you: https://www.kaparts.co.uk/Help/KitchenAidHelp/KitchenAidMixerHelp/KitchenAidSpeedSettings/tabid/615/Default.aspx https://www.youtube.com/watch?v=bM3t46afGcc I hope this helps :)