Kingston Answered Questions & Fixed Issues

what is the problem. you never said?what PC, name it, desk./lap./top?what OS are you running.?

ok try it different PC.s (simple huh?) if it's still dead, it is. reformat it.usually dead mem stickes are caused 99% by removing themwith out first clicking Eject on same. first.

Bruteforce password tools if U dnt know the password.

Hi Teddy. Regarding the issue you have with the memory card & the error message showing on the phone. It could be that the memory card you're using is not compatible with the phone model that you have. Every phone has it's own maximum size of the memory card compatible to it. E.x. A phone could only support up to 2Gb, but your memory card size is 4Gb. You could contact your phone manufacturer & ask the maximum size of the memory card allowed for your phone. If your memory card is compatible with your phone, you could just proceed in formatting the memory card on your phone. **WARNING** Formatting the memory card will erase everything saved in it. Hope that'll help you in some way. **Please rate my post and/or leave a comment** ...Thanks...

just goggle thathttps://www.google.com.au/search?site=&source=hp&q=free+online+virus+scan&oq=free+online+virus+scan&gs_l=hp.3..0l10.385.6032.0.6386.24.14.0.10.10.1.260.2243.3j3j8.14.0....0...1c.1.27.hp..5.19.1256.Usq8zXVQsZ8

what file? what is the problem and whit what unit?

Some pen drives have a small toggle switch with them which make the drive write protected try locating that switch. If there is no such switch then try formatting the drive preferably from safe mode. you can do this by following these steps:1. Shutdown your computer or laptop 2. Insert USB Memory Stick into your laptop or Computer 3. Turn on laptop and then immediately start pressing (F key then Advanced Boot Options screen will come up 4. Select Safe Mode with Command Prompt 5. After loading files if your USB Memory Stick drive letter is (G) for example then write as 6. C:\windows\system32>G: and press enter 7. G:\>format G: and press enter 8. If ask you (Y/N) then press (Y) and press enter 9. Now a full format will start which remove write protection from USB Memory Stick.

the i/o stands for input/output device and the flash drive is one of them,try formatting the drive on another operating system like ubuntu

When it says an error is you must check urdrive properties.

What is the error code or describe the problem

You have to be the computers Administrator to change any values on any Hard Drive on your computer. Click start control panel user accounts on the users tab click the name of the computer Administrator you must have full control. Click start click to open on my computer you should see your Usb drive E: or something right click select properties there will be an array of options select the sharing tab option then advanced sharing make sure you have a tick in the share this folder box then click permissions. Make sure all 3 boxes are ticked full control change and read in windows 7. Click start control panel user accounts click on the administrators account if you have made one or you will have to create one in windows XP. Click start right click on my computer select open Right click the icon of your Usb Drive (It should be E:/ or something) Click Properties in the menu that comes up Click the Sharing tab Click permissions And finally, click Allow next to Full Control. Click start click on my computer to open you should see your drive right click then select format another way Click start control panel administrative tools computer management disk management Right click on your usb drive select format. If you need more help with this post a reply

First, your pc5300 memory runs default at 6300Mhz, not 333. Perhaps your motherboard Front Side Bus line is 333 in which case the memory will drop to that speed, but if the FSB and memory match speed, then it would run at 6300. Since you have an older unit, I would suppose you are running only 333, and that is average speed for that config. In addition, you are only running 1 gig RAM, which is woefully inadequate for Windows 7, so everything you do is going to be slow.

what is the problem with it

call me i will walk you through it5708711074

You may try this total video converter, I always use it to convert video including AVI, MPX, WMV, MP4, MKV, MPEG, MOV, VOB, 3GP, FLV, etc. my friends recommend it to me, it's safe and works pretty well. The conversion quality is good, and the conversion speed is really fast. Here is the download link.http://video-converter.reviewstown.com/video-converter-wondershare.html

Click start control panel Administrative tools Computer Management Disk Management right click on your drive select properties click tools you should see click check now click start two boxes Automatically fix files and scan for and attempt recovery of bad sectors place then a tick in one box then select check now start then after its finished return and tick the other box you should not do anything while the chkdsk utility is in progress any input may damage this drive. You might get best results ticking in one box the returning after it has finished then ticking the other box. It might take some time depending on the size of your disk but be patient. Click start click to open on my computer you should see your usb drive F: or something right click select properties there will be an array of options select the sharing tab option then advanced sharing permissions make sure you have a tick in the share this folder box then click permissions make sure all three boxes are ticked you full control change and read in windows 7 Click start control panel user accounts click on the administrators account if you have made one or you will have to create one in windows XP also If you are running a Windows XP OS then you might be able to: Click start right click on my computer select open Right click the icon of your Flash Drive (It should be F: / E: or something) Click Properties in the menu that comes up Click the Sharing tab Click permissions And finally, click Allow next to Full Control. you might have restore it to its defaults Right click on usb drive select properties you will have an array of options Select the hardware option then select your drive properties policies restore defaults In XP Right click on your drive select properties then on customize restore Default in W 7 Click start click on my computer you should see your USB Drive right click then select format another way is to control panel administrative tools computer management disk management right click on your USB Drive select format usb chkdsk utility Click start control panel Administrative tools Computer Management Disk Management right click on your drive select properties click tools you should see click check now click start two boxes Automatically fix files and scan for and attempt recovery of bad sectors place then a tick in one box then select check now start then after its finished return and tick the other box you should not do anything while the chkdsk utility is in progress any input may damage this drive. You might get best results ticking in one box the returning after it has finished then ticking the other box. It might take some time depending on the size of your disk but be patient. then you restore it to its default status Right click on usb drive select properties you will have an array of options Select the hardware option then select your drive properties policies restore defaults In XP Right click on your drive select properties then on customize restore Default in W 7 you might have to alternate doing this repeatedly until you find the sequence to get the problem is resolved click start control panel scroll to folder options view place a tick in show hidden files folders and drives this may vary depending on your operating system if you need more help with this post a reply

You will need to replace it as there is no bypass.

google translated galacian to englishPROTECAO AGAINST GRAVACAOpost a reply with more details on problem

Sometimes when a flash memory stick or USB external hard drive fails because it was not removed from the USB port properly. If the device is removed by just pulling it out of the USB port, it can cause the flash device to fail, you must click on the Safely Remove Hardware icon on the Task Bar and select the device you wish to remove and only do so when instructed to do so.

When the flash memory USB hard drive device appears to malfunction it maybe possible to restore it by reformatting it. Insert the flash or USB hard drive into the USB port then Click on Control Panel - Administrative Tools - Computer Management - Disk Management.
Then right click on Disk 1 removable drive and click Format. After the flash drive has been formatted it will indicate that it is Healthy.

You need to format the flash or external drive. Format the drive as primary drive and in FAT32. (FAT32 will allow data to be exchanged between MACs and PCs) also between XP/Vista and earlier versions of Windows.
Insert the flash or external hard drive into the USB port then Click on Control Panel - Administrative Tools - Computer Management - Disk Management.
Then right click on Disk 1 removable drive and click Format. After the flash drive has been formatted it will indicate that it is Health.

TRY CHANGING USB PORTS MEANS KEEP IT IN ANOTHER USB PORT