Kingston Audio Players & Recorders - Page 3 - Recent Questions, Troubleshooting & Support

try reinstalling the driver from the other solution or got to kinstons website and update the firmaware
try installing windoes xp service pack 3 if not allreadyinstalled

i think that may be a problem with NAND memory chip, witch is your mp3 2GB memory chip, it may be because of shocks or something like thate. A reheating of this chip may solve your problem, easiest way to do it is to go on a mobile service and ask them to do it for you

it'll be a little expensive, but after about two years of missing my cable, i finally found one that works! it won't let you upload content to it, but it will charge. the solution is a little expensive, though. When you buy the PS3 game, Warhawk, it comes with a little bluetooth headset and a usb cable to charge it. This cable fits the KPEX! It's the best solution i could find. I guess i'll just have to buy a miniSD card to use new content. Hope this helps!

its avialble in market?
where are u located, which city

how to download games?

go to this link to buy the USB cable ,

http://www.superwarehouse.com/Kingston_KPEX_100_2GB_Media_Player/KPEX100_2GB+256/p/1492191

whats wrong with the kpex ?
is it not working?
which city/location are u in ?

http://www.superwarehouse.com/Kingston_KPEX_100_2GB_Media_Player/KPEX100_2GB+256/p/1492191

i would suggest to reset it by pressing the reset button with a toothpick.......i experienced the same problem sometimes,but in your case, my brother who also has one,left it frozen and it went dead after a couple of mins. we connected it to the charger then it worked........i hope it will work on you case.

[email protected]

try resetting it using a toothpick,then switch it on..if it starts with the screen on,check the settings (display duration) then adjust it...try if it works,if not bring it to your kpex dealer for repair.KPEX goes with a warranty


[email protected]

If the display is working, you have audio. Check your amplifier. 1300Watt adaptor ... This unit draws a very low power and that is not needed.

1. Power Off: Turn off the device.
2. Jumper Configuration: Locate the jumper labeled "S16" on the device. Initially, it should be connected to pins 2 and 3.
3. Power On (Alarm+All LEDs Flashing): Turn the device back on. You'll see the alarm LED and all other LEDs flashing.
4. Power Off Again: Turn off the device once more.
5. Jumper Adjustment: Change the jumper configuration from pins 2 and 3 to pins 1 and 2.
6. Finished: Your Porpo YH-2000 is now set to the desired angular unit mode.

If you encounter any issues, you can press the reset switch on the back of the device to reinitialize it.

this model SA rather than SC seems to be a Middle East model. The SC version doesn't have DAB. https://www.google.com/search?q=panasonic+sa-pm250+instruction+manual ..

All questions need clear 'make model (what it is)' first 3 words. https://www.google.com/search?q=fmdott085+V398 ..

Question edited for clarity, typo and CAPS. Question moved from Cars and Trucks category. Claim on the warranty irrespective of how long you have had them. They charge $180 but they cost them $20 to buy from China. Package them up and send them tracked and ask them to replace the batteries. How long is the warranty on AfterShokz? While we hope you never need it, all new Shokz purchased from authorized retailers come with a two-year warranty that begins on your date of purchase. Jan 11, 2019

How To File A Warranty Claim For Your SHOKZ Headphones

https://www.google.com/search?q=Openfit+Shokz+battery+replacement ..

Are you using the charging cables that came with it? That is a type C. Are you securely attaching the charging cable? A loose connection would keep the battery from charging. If you had a low battery, you would see a red light. That you have no light at all suggests there is no charge left in the battery. I'm not sure the reset will work with no charge which is why you ought to check the cables first. But turn it off and then hold down the Multifunction button for 10 seconds to reset it. Then turn it back on and see what happens. If you can, test the charging cable on aother device. If you have another type C charging cable, try it, just to eliminate a bad cable. If these suggestions don't work, you may try the manufacturer's customer support.

The F2100 remote is not explicitly listed as compatible with the AerialBox T2100, I recommend using the remote that came with your AerialBox T2100 for optimal functionality. If you have any specific compatibility concerns, I suggest reaching out to Dish TV customer support for further assistance.

I have the same model with the 8 track player, original manual, and original receipt dated 1975.