Kingston Electronics - Others - Page 8 - Recent Questions, Troubleshooting & Support
I have a kingston 2
this could be due to the format. i would try different formats on your usb. vista normally reads both but your format may be fat32 which is hit n miss. you can try UDF or FAT. I would format on a vista machine. insert, right click on the drive and select format. you may have to do both with a single file to test reads on both boxes. good luck.
My memory card 2gb microsd
when transferring the micro sd to the pc from your mobile do you have to use an adapter? there is a lock on the sd adapter that when pushed down it wont let you edit your anything on your card.
is this the issue you are experiencing?
I turned off the write
Look at the MMC card pictured here. See if there is a slideable lock. If
so, simply slide it in the opposite direction. If there is no slideable
part, place a small amount of tape on the cut-out section, on the
opposite side of the card with the cut-off corner. Be sure the tape is
folded over, so no adhesive gets into the device. Insert the card and
see if it works.
If it does not work, the card itself may be defunct.
The final step to try is reformatting the card. If the card is used in a
phone, use the menu on the phone to reformat the card. WARNING- this
will delete all data contained on the card. However, reformatting the
card may be the only way to get further use from the card.
I am trying for the
Your documentation may have the password.
If not then try the word "password" without the quotes.
Memory card error
Hi michellefwon,
Try the card in your computer using a SDHC card reader to see if it will read your picture files. If that doesn't work then you'll have to shop for data recovery software on line. Ontrack Data Recovery is a very reputable recovery company. They offer recovery services by sending them your card or by purchasing their do-it-yourself software.
Their Website:
http://www.ontrackdatarecovery.com/
Kingston Tech Support
Forgot password for my kingston
The best way to go about this is to find a system using a Linux Operating system. Linux o/s 'es completely bypass this secuirty in almost all cases.
Hi there. When I try
Hi George,
If you right-click on the removable device and go to properties, when in there uncheck the read-only box and click OK.
If that doesn't sort it check the actual card itself and see if there is a switch or slider on it that can be moved.
I have a kingston micro
Make sure the little white switch on the side isn't set to write protect the SD card. Try and format the SD card, it will erase whatever is on the card. To do this right click the SD card removable disk under my computer, then click format. I would make sure you select FAT16 in the options there. Then try to copy files to the card again. If it still doesn't work, try using the SD card in another machine.
If the card works in another machine, we know the SD card is good. If it doesn't work, you might have a bad card.
If the card works in another machine, try another SD card in your laptop, to make sure the laptop connector for your card is not bad.
My micro sd card is
Go to Control Panel ' Adminitrative Tools ' Computer Management
In Computer Management find Disk Management, if the card is being recognized at all, then it will show up as a removable disk. Right click on the disk and you can format it.
Jim
My memorry card is any
Hi,
Here is a tip that I wrote
about SD Cards and how to unlock and lock SD Cards.
If you are getting a memory
card locked message then check
this out.
How
to Unlock SD Card
heatman101
'
'
;';
';
';
Hello, i am using a mac os x. how do i unlock a
Try reformatting it:
**THIS WILL DELETE ALL THE DATA ON THE DRIVE**
1. Open Finder
2. Applications
3. On the left column, you should see your thumb drive. Click on it.
4. Click on the "Erase" tab near the top
5. For "Format:" select "FAT32"
6. Click on the "Erase..." button
HOW TO format kingston usb
Sir
select your kingston usb device on a my computer window right click to get option select format option you will get the window select quick format and hit format button to format it.
Not finding what you are looking for?