Kingston Computers & Internet - Page 3 - Recent Questions, Troubleshooting & Support

remember that a memory device needs space in which to operate so a 4gb stick will have less than the 4gb storage It is very possible that there is some memory being used that results in the 1.96 remaining one possible solution is to read the stick and see if there is any files or folders than are required and then reformat it to get back to full memory

Try this:https://tails.boum.org/doc/first_steps/usb_reset/windows/index.en.htmlIt worked for me.

When the flash drive is inserted and is still detected Kingston, flash drives can be repaired and the data can be saved. Cause, there is damage to the partition table Solution: 1. Save the data. To saved data, you can use EASEUS Data Recovery software. 2. After the data is saved, to fix the flash drive using the software HP Drive Key Boot Utility (Support Win XP, Vista, 7) How to install the HP Drive Key Boot Utility to the operating system Win XP: double click the file cp006049.exe - select Install Win Vista & 7: double click the file cp006049.exe - select extrackHow to use the software HP Drive Key Boot Utility For Win XP, first way: Insert the flash drive - open the HP Drive Key Boot Utility - Next - select flash drives - Next - Create New or Replace ..., select Next - Next select Hard Drive - Create New File system, select Next - wait for the process is completed - Select Next - HP firmware Flash ..., select Next - wait for the process is completed - finish. Then, quick format the flash drive. For Win XP, second way: Insert the flash drive - open the HP Drive Key Boot Utility - Next - select flash drives - Next - select Backup/Restore - Next - click Restore - click browse, open file C:\Program Files\Compaq\hpdkbu\ flash\initrd.img - Next - wait until the process is complete.For Win Vista & 7, first way:Insert the flash drive - double click cp006049.exe - for example, extract to C:\HP Drive Key Boot. Open folder C:\HP Drive Key Boot then double click file hpdkbu.exe - Next - select flash drives - Next - Create New or Replace ..., select Next - Next select Hard Drive - Create New File system, select Next - wait for the process is completed - Select Next - HP firmware Flash ..., select Next - wait for the process is completed - finish. Then, quick format the flash drive.For Win Vista & 7, second way: Insert the flash drive - double click file hpdkbu.exe - Next - select flash drives - Next - select Backup/Restore - Next - click Restore - click browse, open file C:\HP Drive Key Boot\initrd.img - Next - wait until the process is complete.Description initrd.img files, the image file for the schema partition flash drive capacity <= 2GB. For capacity >2GB, example: 4GB, 8GB, 16GB, 32GB, etc when we use the initrd.img file, will be changed to 2GB capacity. To restore the capacity of flash drives, do the Low Level Format. To make the process of Low Level Format, use software HDD Low Level Format Tool. How to restore the capacity of flash drive KingstonOpen HDD Low Level Format Tool - select drive - Continue - click S.M.A.R.T - click Get SMART Attributes - click the tab LOW LEVEL FORMAT - click Format This Device - wait for the process is completed - Finish. Then, remove the flash drive from the computer, then insert it again. Then do a quick format the flash drive. Finish Hope it helps

have you tried other a different flash drive of something like a usb charger etc? If it works then then the problem is with the flash drive, if not them its with your USB port

You don't any driver of the USB drives on XP. The drivers are built-in with the OS. If the USB stick does not work than that might be another problem. Read my previous entries, http://www.fixya.com/support/t4094662-usb_key_problem and http://www.fixya.com/support/t4202542-when_plug_in_pc_show_pendrive might be helpful.

Go to this link, enter make and model of mB Crucial com DRAM solid state drive SSD memory upgrades for Dell Mac Apple...

Brand new? Doesn't sound right. Remove and try a different USB port.

Format it.

I can think of several possible reasons it's not getting recognized: 1. It's broken 2. Your OS is so old it doesn't recognize it 3. you need a driver you may be able to get from the driver manufacturer

You have to be the computers administrator to change any values on any hard drive on your computer

click start control panel user accounts on the users tab click the name of the computer administrator you must have full control

click start click to open on my computer you should see your usb drive could be E: or something right click select properties there will be an array of options

select the sharing tab option then advanced sharing make sure you have a tick in the share this folder box

then click permissions make sure you have all 3 boxes ticked full control changes and read in windows 7

click start control panel user accounts click on the administrators account if you have made one or you will have to create one in windows XP

click start right click on my computer select openRight click the icon of your usb drive (It should be E:/ or something) Click Properties in the menu that comes up Click the Sharing tab Click permissions And finally, click Allow next to Full Control. if you need more help with this post a replyhop this helps

1.Reinstall ur usb3.0 and try to connect ur usb drive again.

2.Else try with others usb port in ur motherboard.

2261 pram It's identified as 2261 pram usb device and not working

It is possible that your new phone isn't compatible with this old 16GB SD memory card
It is also possible that this 16GB SD memory card simply has died but you can verify this by testing it by trying to access this SD memory card in any computer capable of reading a SD memory card if it not found then this SD memory card simply has died

There should be instructions on the printer itself

Probably you just copied a shortcut to the location of the files. You need to go back and verify whether this is the case.

lol , maybe the best way is to buys a new one , but if you have a good one and it's cost much so tell us the name of it to see what we need to do

What is this micra b2 ? lol sorry for it but i just know the micra from nissan :P