King Kutter Answered Questions & Fixed Issues

In Gearboxes use gear oil (type GL5-85W 140 or Triple Zero
Grease; which can be poured, and has "EP" i.e. "Extreme Pressure" additives.) Fill the gearbox to approximately half-full level.

If it is leaking around the shaft you can replace the seal.

http://www.youtube.cohttp://www.everythingattachments.com/Tractor

http://www.everythingattachments.com/Tractor-3-Point-Hitch-Tillers-Rotary-Tillers-s/76.htm

go to the second site first, it will explain your "problem.". Your problem is you need to adjust the length of the pto shaft to your particular application. not all pto shafts fit all attachments "out of the chute"
once the shaft is adjusted OR prio to modifying it, view the first video. both or very well presented. i've been there!
Happy tilling!!

steve wood
Rancho de Suenos
Albuquerque, NM

At least once a year back the clutch bolts out at least 3 turns and engage PTO at operating speed a couple times.Once thats done turn bolts back in the same amount of turns.By doing this you burnish the disc's and prevent them from rusting/seizing together with the plates.

most warranty on tillers is 1 to 2 years depending on the brande, also it must be a MF defect. if the shaft broken for improper uses you may have a problem. warranty service centers well know what happened and how it broke. call your 800 number in your book also it gives you your warranty info there to.

90 wt gear oil

http://www.kingkutter.com/
Perhaps you can find it here? Hope this helps.

go to kingkutter.com and download the manual.
hatter1