King Kooker Recent Questions, Troubleshooting Help & Support

Do you work here? Claim your company

  • 15 Products
  • 9 Answers

You can get a new one for around $10 - $15. When mine broke, I decided it was just safer to buy a new one.

King Kooker Deep... | Answered on Jul 15, 2012

It's not hard to use them as long as you follow the instructions for safety. Here is a youtube clip for a deep fry thermometer - it's not a King Kooker make but it works the same way.

King Kooker Deep... | Answered on Jul 15, 2012

The regulator valve is sticking. Mine does this all the time. I tap it a few times and it frees up usually. It will need to be replaced one day.

King Kooker... | Answered on Nov 26, 2009

natural gas nozzles are sized diffrent than lp gas.not safe to convert.should consult manufacturer

King Kooker... | Answered on Oct 10, 2009

You may need to resize the orifice, sounds to me like it is too big. If you have an adjustable orifice try tightening it down a quarter turn at a time till that flame turn pretty. Leave that shutter wide open till you start getting a blue flame. Make sure you have no cob webs blocking the orifice.Blow out and remove all rust from the burner.

If you need further help, reach me via phone at

King Kooker 1209 | Answered on Mar 06, 2009

leave the propane tank on and install a gas ball valve after the tank. you can see that the gas is on by the position of the valve,

King Kooker... | Answered on Aug 19, 2008

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top King Kooker Experts

Michael DeMondo
Michael DeMondo

Level 1 Expert

25 Answers

Dan Webster
Dan Webster

Level 3 Expert

8220 Answers

Are you a King Kooker Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides