Kenwood Audio Players & Recorders - Page 3 - Recent Questions, Troubleshooting & Support

bad power supply

it sounds like the button cell battery inside the receiver has gone bad if you take the cover off you will see it its about the size of a quarter. You can purchase a new one for around $4. Let me know if this works or if you need assistance in taking the cover off the receiver

google kenwood kr-v6020 manual

Check with your main sound driver I.C.If you could get a replacement part for that specific model then they fairly easy to change.

Use the lightning to mini jack convertor that came with the phone when new or purchase a Lightning to jack convertor lead.

https://freeonlineservicemanual.blogspot.com

Now you know why they gave it away. There should be a small switch back there that is operated by the play button. It is a good make, it is probably worth taking to a Kenwood service tech, so fixing, cleaning and service..

power supplies do that when they die

Chec utube or pinterest

Don't forget you need an aerial.

No, they aren't programmable. One remote, one device. $8.99 here https://www.replacementremotes.com/kenwood/krx1000-audio-system https://www.google.com/search?safe=off&rlz=1C1QJDB_enCA643CA644&sxsrf=ALeKk033eGuch2WIFjuBHwnHhkaCr2YKjw%3A1615349818047&ei=OkhIYPazAoG5tQbeqI2YBQ&q=kenwood+kr-x1000+replacement+remote+control ..

I don't see you trying the MUTE button. Page 71. Second bullet. Blinking MUTE is actually mentioned.http://www.retrevo.com/support/Kenwood-VR-5700-Receivers-manual/id/480ag222/t/2/It's always a good idea to read the manual.

General RMS Power (CTA-2006) N/A RMS Power (Manufacturer) Peak Output 50 watts RMS Power Bandwidth Preamp Outputs 6-channel https://www.crutchfield.ca/S-LiNffOR4ZUx/p_113KDCX891/Kenwood-Excelon-KDC-X891.html ..

Use code search on your GE URC to find something that works. If a search through all codes stored in the UIRC fails, try a different one.

Applicable codes would be found in a compatible remote control.

https://www.ebay.com/itm/Kenwood-Service-Manual-GE-292-Graphic-Equalizer-Original-Repair-Manual-/381118829442 (not free)

Internal components have failed. Return to Kenwood authorised service for repair.

1. Display failure 2. Defective display driver circuit

The first thing to check is the solder connections on the display itself. The display should have a series of pins that you will see on the PC board that is behind the front panel. Resolder the connections on either end. These are the connections that supply both the +and - sides of power. These often develop poor connections. Update this with the results of the resoldering and we'll continue from there if the problem is not resolved.

Dan

The remote is nothing more than a device to change the contents display face. The code for the unit is embedded into the unit behind it, so the old code will work. It will not even notice you changed the remote control. If you bought a remote control for a different Kenwood audio, then it is a lottery. You can program a bespoke remote, they are set to one device, or a range of devices sharing the same code.

Kenwood Audio Remote Control New OEM Replacement ...

www.kenwood.newremotecontrol.com > KenwoodAudio

NEW Kenwood Audio & CD Remote Controls. ... VR-208, RC-R0607, A70-1194-05. VR-2080, RC-R0907, A70-1191-05. VR-209, RC-R0607, A70-1194-05. VR- ... and also http://www.remotecentral.com/cgi-bin/mboard/rc-remote/thread.cgi?2547 ..