Kenwood Audio Players & Recorders - Recent Questions, Troubleshooting & Support


RC-R0620 is the remote control model number (RC-R0622 in U.K./EU) you can buy on eBay or amazon A universal remote may work but only if the universal has codes for your Kenwood. Check first.

Kenwood Audio... | Answered Yesterday


Encompass claims to have the remote control for the RXD-A53 here: https://encompass.com/model/KENRXDA53 . The direct link is https://encompass.com/item/3994551/Kenwood/A70-1337-05/ . The RC-553 remote isn't in stock but should ship in 10 days. Other sites that sell replacement remotes list the RC-553 for sale. One source is https://replacementremotecontrols.com/kenwood-rc-553-audio-stereo-system-remote-control/ . There is also an Ebay listing for the remote control.

I hope this helps.

Cindy Wells

Kenwood Audio... | Answered 2 days ago


Hello Anonymous, you can connect your GE-1000 on the KA-1000, for that you will have to use two double RCA RCA chip cables, the first game is connected from LINE IN on the GE-1000 to REC OUT A
in the KA-1000 and the other LINE OUT game of the GE-1000 to PLAY IN A, of the KA-1000
In order to listen to equalized, you must play through the Phono, Radio or Auxiliary input and select Tape A
Try and comment
Regards Franco Dosil

Hola Anonimo, puedes conectar tu GE-1000 en el KA-1000, para eso tendras que usar dos cables dobles de fichas RCA RCA, el primer juego va conectado de LINE IN en el GE-1000 a REC OUT A
en el KA-1000 y el otro juego de LINE OUT del GE-1000 a PLAY IN A, del KA-1000
Para poder escuchar ecualizado, deberas reproducir por la entrada Phono , Radio o Auxiliar y seleccionar Tape A
Prueba y comenta
Saludos Franco Dosil

https://www.manualscenter.com/manuals/kenwood/ge1000-owner-manual.html
https://www.vintageshifi.com/repertoire-pdf/Kenwood-4.php

Kenwood Audio... | Answered on Oct 08, 2019


Hello Anonymous, the fault may be in the power supply and polarization circuit of the display
The display is powered by an alternating current (AC) voltage of 3 to 4 volts and a negative direct current (DC) polarization voltage of - 22 to -27 volts
there are usually associated capacitors that lose value and can cause this type of failure
If you have technical knowledge, I send you the link so you can download the service manual
If not consult a specialized technical service
I hope you can solve the problem
Regards Franco Dosil

Hola Anonimo, la falla puede estar en el circuito de alimentaci?n y polarizaci?n del display
El display se alimenta con una tensi?n de corriente alterna(CA) de 3 a 4 volts y una tensi?n negativa corriente continua (DC) de polarizaci?n de - 22 a -27 volts
por lo general hay capacitores asociados que pierden el valor y pueden producir este tipo de fallas
Si tienes conocimientos t?cnicos, te env?o el link para que puedas descargar el manual de servicio
Sino consulta a un servicio t?cnico especializado
Espero puedas resolver el problema
Saludos Franco Dosil

https://www.vintageshifi.com/repertoire-pdf/pdf/telecharge.php?pdf=Kenwood-KXW-8030-Service-Manual.pdf

Kenwood Audio... | Answered on Oct 08, 2019


It will be between your outputs for the speakers before going into your television . Follow wiring instructions.

Kenwood Audio... | Answered on Aug 21, 2019


Tape (audio) in, is input.
Tape (audio) out, is output to record what the receiver is playing.
This won't work, to connect an equalizer.
Receivers have a zero out and in and are jumpered until adding what you want to add, that's where equalizer or amp, pre-amp goes

Kenwood Audio... | Answered on Aug 19, 2019


Press the power on on the remote.

Kenwood Audio... | Answered on Aug 18, 2019


pl go through the manual which link is attached herewith Kenwood RXD V323 Manuals

Kenwood Audio... | Answered on Jul 06, 2019


pl go through the user manual for your ready reference Kenwood RXD V323 Manuals

Kenwood Audio... | Answered on Jul 06, 2019


pl check the user manual from the link for ready reference Kenwood RXD V323 Manuals

Kenwood Audio... | Answered on Jul 06, 2019


check the balance in the player. if it is good check the connectivity of the speaker.

you can download user manual from the below link. use it if you are not having user manual. Kenwood KDC X396 Manuals

Kenwood KDC-X396... | Answered on Jul 06, 2019

Not finding what you are looking for?
Kenwood Logo

2,737 questions posted

Ask a Question

Usually answered in minutes!

Top Kenwood Audio Players & Recorders Experts

 Grubhead
Grubhead

Level 3 Expert

5699 Answers

Mike Duncan
Mike Duncan

Level 2 Expert

219 Answers

Don Hart

Level 2 Expert

127 Answers

Are you a Kenwood Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...