Kenwood Blenders - Recent Questions, Troubleshooting & Support

There is a name plate, it is glued on so you need to prise it off. Underneath is a tab - press it along with the other two on the side and the motor assembly slides out.

That usually happens when the jug is locked into the the wrong side of the base. With no blade and no jug, press a cocktail stick or a ball point pen into the hole in the base where the switch is and switch it on. Does it work? https://www.google.com/search?q=FDP64+blender ..

Your partner did the deed - let your partner fix it and don't be a fool.

True or False All Blenders Can Crush Ice

hi there, i have one of these and am quite tech savvy and want open the sucker up and see whats wrong. Just would rather open it with minimum damage to the casing.Is there a way i can private message you my email address?thanksDan

Can you add a photo please Chris?

Generally speaking, belt tracking issues are usually due to one or more of the shafts that support the pulleys not being perpendicular to each other - this applies to everything from treadmills to fan belts. Check and correct if possible: that the motor is securely mounted in the housing and that it is not installed crooked; and that the shafts aren't loose or have sloppy side to side movement. Belts should be tight - but not overly so.

Visit lanas-kenwood-spares.co.uk where you can purchase what you require to fix the problem

Look down into the implement socket on the handpiece and see if there is an obstruction. The rubber 'cap' from the end of the last implement used may still be stuck in there. If so the use a small hook to prise the cap out and re-attach to implement missing same. See picture. This was same problem I had with HB720 blender.

That kenwood is a UK model so if your in the US it's tough to source. The ring you need should have an outside diameter of 76 mm and an inside diamete of 56 mm. This is a uk ebay link with the exact part. 1 Kenwood BL300 Blender Liquidiser Rubber Seal Gasket This is a us amazon link with something that might work but not exact. There is a uk amazon equivalent if that works better for you. Amazon com kenwood blender seal

You should be able to get one from Kenwood at http://www.kenwoodworld.com/en-za/customer-support - you will need the model number. Or go to http://www.manualslib.com/brand/kenwood/ where they seem to have them for KMC500 models (scroll down to food processors). Good luck!