Kensington Recent Questions, Troubleshooting Help & Support

You should be able to, as long as its compatable.

One or two things you could try, first try updating your usb device in settings or go to your keyboard settings and see if you need to change anything there. good luck!

Hi! That depends on the quality of the mouse that your using. Cleaning/ opening the mouse will not work at all. The quality of the mouse.

Hi! You can search over the net for your keyboard manual. Just look for the same version that you're using.

Most drivers can be found on the internet. Try searching in Google

Hi... If the mouse is somewhat used for a long time since it was bought, I usually check the mouse cable. Sometimes, when the cable is stressed out especially the line near the clicks/buttons, it's not totally cut-off yet, Try opening the mouse and try one by one pulling the colored wires inside the cable... you should be able to pull at least one line which caused the problem... If there is then you need to connect it back... you need a little help from an electronic technician guy... but if you are... well... you know what I mean...

try different case, if same goto apple store

You can either 1) re-install the driver, or 2) roll back the driver. Either one of these may help. To roll back your driver in Windows XP, go to Start --> Settings --> Control Panel --> Mouse. Click on the "hardware" tab. Select the appropriate pointing device, and click "properties." Click the driver tab, then select "roll back driver." Under the "hardware" tab, there may be more than one mouse. If this is the case, select the one that is not used, follow the settings above, and then select "uninstall." Or, you can go into Control Panel --> System --> Hardware --> Device Manager, and remove the device under "Mice and other pointing devices

Try slowing down the click speed with either the software that came with it or in you operationg system (windows or other).

take your laptop model number and find a strip down guide once you have the panel off with the power button on have a look at how it attaches most power buttons for pc's and screens is a button with two arms connecting it to the case if so you can fix these with super glue and a bit of patience or if you feeling suave and have a 3D printer you could always print a new one off

22 x 22

038,033. Try these codes. If you wish to get more, check the sites linked here. It has setup codes, and setup procedure to many popular brand remote controls. Pull up older posts. http://electrohelponline.blogspot.com/ http://electro-medical.blogspot.com/

Is it above the #2? cap 2 Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/jeff_24365d731679262d