Kenmore Popular Questions, Answers, Tips & Manuals

There could be several possible causes for your Kenmore top load washer not agitating or spinning. The actuator is one possibility, but it's not the only one. Here are some other potential causes to consider: Lid switch: The lid switch is a safety feature that prevents the washer from agitating or spinning when the lid is open. If the switch is faulty, it may prevent the washer from agitating or spinning even when the lid is closed. You can test the switch by using a multimeter to check for continuity when the lid is closed. Drive belt: The drive belt connects the motor to the transmission, which turns the agitator and drum. If the belt is broken or worn, the washer won't agitate or spin. Check the belt for signs of damage or wear, and replace it if necessary. Motor coupler: The motor coupler connects the motor to the transmission. If the coupler is broken or worn, the washer won't agitate or spin. You can check the coupler by removing the motor and transmission and inspecting the coupler for damage. Transmission: If the transmission is faulty, it may prevent the washer from agitating or spinning. This is a more serious issue that may require a professional repair. Based on the symptoms you described, the issue could be with the actuator, but it's hard to say for sure without further testing. The actuator controls the shifting of the transmission from agitate to spin, so if it's not working properly, it could prevent the washer from agitating or spinning. You can test the actuator using a multimeter to check for continuity. If you're not comfortable diagnosing or repairing your washer yourself, it's best to contact a professional appliance repair service to diagnose and fix the issue.

Press, High temp wash, heated dry, High temp wash, heated dry, High temp wash, Heated dry The panel should all light up at which point you need to press cancel. This will reset the control board if it can be reset. If you do not have a "heated dry" button use "saver dry" or "air dry"

It should be in the power head to the side of the hinge. Sears says there are no parts presumably because it has reached its service life. https://www.searspartsdirect.com/model/61rux2nv6w-000582/kenmore-bu4022-upright-vacuum-parts https://www.google.com/search?q=kenmore+intuition+bu4022+replace+power+head+switch ..

$80 to $158 depending on where you buy it. https://www.google.com/search?q=kenmore+80+series+gas+dryer+timer ..

Yes, there are a few things you can check and adjust to ensure the door latch on your Kenmore Elite SmartHeat QuietPak 4 dryer is working properly:

1. Check the door catch and strike plate: Make sure the door catch is properly aligned with the strike plate, which is the metal piece on the dryer frame that the door latch engages with. If they are not aligned, adjust the catch or strike plate until they are in proper alignment.
2. Inspect the door latch: Check the door latch for any damage or wear. If the latch is damaged or worn, it may not catch properly. If the latch is damaged, it may need to be replaced.
3. Check the door hinge: Make sure the door hinge is tight and secure. If the hinge is loose, the door may not close properly, causing the latch to disengage.
4. Adjust the door catch tension: There may be an adjustment on the door catch to increase the tension. Check your dryer's user manual for instructions on how to adjust the tension on the door catch.
5. Clean the door latch and strike plate: Over time, lint and debris can accumulate on the door latch and strike plate, preventing the latch from catching properly. Use a soft brush or cloth to clean the latch and strike plate.

If these steps do not solve the issue, it may be best to contact a professional appliance repair service for further assistance.

Give this a try to see if it'll reset...disconect power to it for 30 seconds while no power press power button for 10 seconds then press the start/pause button for 10 seconds. Plug in or turn breaker back on and see if it reset. Best to You

The E0 39 error on a Kenmore Elite 790.99913804 cooktop indicates a communication error between the user interface board and the power supply control board. This error can occur due to a faulty connection or damaged wiring between the two boards. If replacing both the user interface board and power supply control boards did not resolve the issue, it is possible that there is a problem with the wiring harness or another component in the cooktop. It may be necessary to consult a professional technician to diagnose and repair the issue. In addition, it is recommended to check the user manual for troubleshooting steps specific to this model of cooktop. The manual may provide additional information on how to resolve this error code.

Question edited for clarity, 'Manuel' is the name of a Spanish gentleman, a 'manual' is what you want. :>D June 1999 possibly. Dates are decoded from the Serial Number. This is the closest manual it is a 655 series 159****

Kenmore 665.15989 Manuals - ManualsLib

ManualsLib https://www.manualslib.com > ... > Dishwasher We have 1 KENMORE 665.15989 manual available for free PDF download: User Manual. KENMORE 665.15989 User Manual (25 pages). https://www.google.com/search?q=665.1591680+date+of+manufacture ..

There is a communication issue with the display board and the main unit.

These are all the top suppliers, but that model number is not showing. If the display has gone dim, you can get an electronics technician to replace the capacitor that runs the display. https://www.google.com/search?q=Kenmore+Microwave+318279601B+parts ..

No idea. Try asking Kenmore.

Beth it's probably the door spike. You can find additional info at tthese sites. You'll need the Model #. They all have helpful 800#s to talk with a tech and make sure you are getting the right part if there's a doubt or want to talk about your issue. https://www.appliancepartspros.com/ https://www.repairclinic.com/ https://www.partselect.com/Appliance-Parts.htm?msclkid=a7b3213444cd1e09294a4576b9211200 Best to you!

The Kenmore 158.1787180 uses a low shank sewing machine foot. See some of the parts here: https://www.sewingpartsonline.com/kenmore-158-1787180-sewing-machine-parts.aspx?index=1 . As long as you get the correct shank height, most presser feet are universal. You can also get the snap-on feet and an appropriate shank to snap-on foot universal adapter. (Some button-hole feet need to plug into the sewing machine, for example.) It can be hard to measure the shank on presser feet. You need the distance from the bottom of the foot to the bottom of the screw opening. See https://www.anniescatalog.com/pages/which_foot.html . I've found calipers are better then most tape measures for this. (If you measure to the absolute center of the screw, then you add 1/4".) I hope this helps. Cindy Wells

To light the pilot light on a Kenmore Maxitrol oven, please follow these steps:

1. Locate the pilot light assembly. It's usually at the bottom of the oven, behind a small metal cover.
2. Turn the oven control knob to the "off" position.
3. Remove the metal cover by pulling it out or lifting it up, depending on the model.
4. Locate the pilot light and the pilot light valve. The valve is usually a small red button located near the pilot light.
5. Press and hold the pilot light valve in for a few seconds while you use a long match or lighter to light the pilot light.
6. Once the pilot light is lit, continue holding the pilot light valve in for another 30 seconds.
7. Release the pilot light valve and make sure the pilot light stays lit. If it doesn't, repeat the process.
8. Replace the metal cover and turn the oven control knob to the desired temperature setting.

Note: If you're having trouble lighting the pilot light or keeping it lit, it may be best

Either there is a frozen or a clogged water line.Or the water lines need to be replaced.

check here..... https://www.fixya.com/support/t21802461-kenmore_freezer_model_106_74253400 Best to you

Here is a 155 series model service manual and it doesn't list one https://sewingdude.files.wordpress.com/2020/05/kenmore-158.15511-service-manual.pdf Nothing in this search either. https://www.google.com/search?q=Kenmore+158.1355080+sewing+machine.+fuse+location You need a good man with a digital multimeter to diagnose. Don't just replace things like motors on a guess. They can be tested. It may also be the foot pedal which is where your power comes from. What type of bulb did you put into cause this?? ..

This reports that those number are incorrect http://www.appliance411.ca/service/date-code.cgi https://www.google.com/search?q=kenmore+serial+number+lookup+age ..

ck this out.... https://www.appliancepartspros.com/b/gas-oven-igniter-glows-but-wont-light-top-3-reasons-and-fixes/ another place for parts... https://repairclinic.com you can also call their 800#s to confirm parts and get other info. or selectparts.com Best to you.

To reset the electronic controls on your washer, shut off the circuit breaker or fuse to the washer or unplug the washer for 2 minutes. For models that have a timer control knob, turn the knob around and back to any position other than final spin for the interrupted cycle. Then, restore power.