Kd Tools Hand Tools - Recent Questions, Troubleshooting & Support

It is uncommon to do so these days, most will replace the entire axle as it is cheaper and easier.

get a rubber pad at Tractor supply that they use for horses - cut it about 3" wider on all 4 sides and put under it - that should solve it.

If the cv joint has split or broken there are two options available to you. One is to remove the axle and fit a genuine boot back on. It will cost the price of the boot plus around 2 hours labour. The other option is to get an aftermarket boot that is split and put it around the cv joint and clip and glue it back along the split. They are specially made and do a good job and costs the price of the boot and some of your time. There is no need to remove the axle to do it. Check at a good auto spares shop for a replacement cv boot kit

not car so moved this to TOOLS (hand) google the user manual or as maker SWINGLINE

its not a car so move you to TOOLS (general)most times the battery is now NOGOOD>Milwaukee M18 Cordlessbla bla.never have just one battery or not be able to tell which end is wrong of 3.battery ,charger or tool

take a small brush like one you would use to clean a gun. clean it well and use gun oil to lube it

Probably torx although we have no idea what your referring to

For the first, I used "Phillips 0 driver bit" in my Google search. That got several links, including https://www.amazon.com/Phillips-Driver-Long-Miniature-Screws/dp/B07NBP3D7K . The second search was "#0 square driver bit". Amazon had a single bit in stock. Ace Hardware has this 2 pack: https://www.acehardware.com/departments/tools/power-tool-accessories/screwdriver-bits/2160976. Both of these are 1" long 1/4" hex shank for use in any quick-change 1/4" bit holder. I hope this helps. Cindy Wells

I have the manual and prts list , you can phone this number for parts, the parts depot is in Ottawa 613-724-7724. if you the diagram send email to [email protected] and I will send it to you.

go to the support center for the maunfacture site

Check on the side of the box it will give the size it requires. It will look like this T50, T40, T25, and so on.

They have an online form... but I have had no luck getting mine replaced. I have broke 2 so far.

You will get all the information on Toolbox from here https://toolboxwidget.com. Download your PDF copy today or email us to [email protected] for ordering book.

Maybe your battery is died, you can replace it on http://www.drillbattery.com.au/buybattery.php/makita_1220_power+tool+battery.html

it is a type of screwdriver bit

they are typically made out of cast iron, often with little bits of concrete infused in them

The pitch of the roof is described as the vertical rise of the roof divided by the horizontal span of the roof. The pitch of the roof is known as slope, and this happens to be a tangent function. When pitches are kept below 3.5, they are considered as low pitch, and when the pitch is kept from 3.5 to 7.5, it is considered as medium pitch anything above than 7.5 is considered to be a steep pitch. Depending on your requirement and style of construction you can decide the pitch of your roof. Click on Gotcha Covered Contracting to know more about roofing.

I have a box of 5000 8mm 960/101 Vanguard Primo Staples - offer me something to cover the postage!

When you are working with brick or concrete, you should check out the Black & Decker DR670 Hammer Drill. It is specifically made to tackle this purpose.