kawasaki Televison & Video - Page 8 - Recent Questions, Troubleshooting & Support
It sticks
You need to isolate the problem. Please try the steps below:
1. Try playing other DVDs to see if that would work.
2. Load the problem DVD into different player to make sure that there's no problem with the disk.
3. Clean the lens of your DVD/R
To clean the lens, you need to buy a DVD cleaner in any computer shop. If same problem exist, you need to contact the computer manufacturer.
Have a great day!
5/11/2009 10:16:36 PM •
kawasaki...
•
Answered
on May 11, 2009
I Have sound but no video
if its underwarranty i suggest get it replaced.
NOW , there can be two problems that can be considered faulty in this issue .one is very simple ,just remove all the external cables/wires connected to the PVS also unplug it from main power outlet for particular minute of time say 5 minutes.then connect evrything back as it was.then check out .if the problem gets solved and the picture comes on the screen then its due to loose wire.so not to worry.BUT if the problem remains same then its due to the another option is the backlight is dead.if it turns on for a second and then off, it may be because it's overheating for some reason and a thermal protection turns it off so it does not burn.in your case what happened -------- the supply to the backlight goes thru a small transformer like coil, which gets hot while playing, what has happened is that u might have played it for a long period of time by which the insulation coating on the winding has melted resulting in the wires of the coil getting shot and thus the lights not glowing .so its necessary to get the back light replaced but its a tough job and i suggest you to get it done by local repair center technician.and finally yes its wotrth getting it repaired.many a times if you are playing the movie on the battery connection, the battery is not completely charged or the battery is drained so this happens.
please do rate the solution.
thank you.
keep updated.
4/9/2009 10:02:20 PM •
kawasaki...
•
Answered
on Apr 09, 2009
My is not spinning and gives the message that no disc
Hi dommami_2000 -
This is most likely a problem with the hardware, assuming you've already tried multiple discs. If the disc does not spin at all, the drive motor is likely bad. I would recommend excercising whatever warranty came with the unit, if still available.
Let me know if you have any further questions.
~Andrew
Help
HI,
Its a good company product.Consult with the service engineers about the problem or report to the company directly.
--------------------
bhuvana
The Link Building Service
Disk not valid
hEY SORRY ABOUT YOUR DVD BUT IF YOU CANT FIX IT WILL YOU SELL YOUR REMOTE TO ME?
3/15/2009 1:35:12 AM •
kawasaki...
•
Answered
on Mar 15, 2009
Not finding what you are looking for?