kawasaki Office Equipment & Supplies - Answered Questions & Fixed Issues

This could be the CPU I/O PBA. Try rebooting and unplugging to see if the error goes away. If not, call an authorized service technician.

Office Equipment... | Answered 7 minutes ago | 102 views

08009 Fuser NTC 3 temp too high. Most likely NTC shot.

Office Equipment... | Answered 11 minutes ago | 83 views

Error code says its Carriage electronics failure, but chances are its a failed print head. Shut off machine and unplug. Remove all printheads and close caps. Close all cover and start printer. Printer will ask for print heads. Insert one at a time and continue shutting off printer and turning on again until the same error comes up. When it does, its the last printhead you stuck in.

Office Equipment... | Answered 13 minutes ago | 1,858 views

Fuser NTC 1 not working properly. Replace.

Office Equipment... | Answered 17 minutes ago | 371 views

Need model number to be more accurate. But if it is Plotwave series, ensure all drawers and covers closed. Open and close the fuser cover and reset. If this doesn't fix the problem, call an authorized service technician.

Office Equipment... | Answered 18 minutes ago | 403 views

Severe developer pollution. Call a technician for this. He will need to run a test to feed more toner into the developer to get the voltage stabilized. It is not user fixable.

Office Equipment... | Answered 20 minutes ago | 392 views

Developer pollution. The toner may have ran out, or the motor that feeds the toner may have stopped working.

Office Equipment... | Answered 22 minutes ago | 443 views

Check the blouse levers under the manual feed for free movement and for any paper obstructions.

Office Equipment... | Answered 24 minutes ago | 111 views

I'm assuming this in a TCS4 Scanner? If so, it may need a technician to calibrate it. The customer calibration only works after a full technical calibration is carried out. If it never is, you will never get the best quality.

Office Equipment... | Answered 28 minutes ago | 171 views

Model number of OCE?

Office Equipment... | Answered 30 minutes ago | 142 views

It would be helpful if you can mention which model number error 15505 is on.

Office Equipment... | Answered 31 minutes ago | 87 views

Transfer stall USB bitmap data. Either the USB board is flaky or the Spider PBA is faulty. Before replacing anything, upgrade the software and firmware to the latest level. The new software may solve the errors.

Office Equipment... | Answered 32 minutes ago | 1,341 views

Fuser NTC 3 not working properly. These NTCs are extremely fragile. Call an authorized service rep to replace.

Office Equipment... | Answered 35 minutes ago | 45 views

Knife reaches left side too soon. Check for paper strips in knife assembly area for contamination by removing front drawer cover.

Office Equipment... | Answered 37 minutes ago | 174 views

What is the error?

Office Equipment... | Answered 39 minutes ago | 453 views

Residual Toner Container Full or Missing. Waste toner. If you put a new waste toner container in and it is the same problem, it is the sensor. Try cleaning the sensor.

Office Equipment... | Answered 43 minutes ago | 365 views

08527 Fuser temperature limit safety activated. This can be several components. Fuser, NTC, Spide PBA or fans. I recommend calling an authorized service rep to check the error log files.

Office Equipment... | Answered 48 minutes ago | 134 views

I'm assuming you have a TDS750. Fuser NTC 4 is broken. These NTCs are extremely fragile. I would recommend you call an authorized Oce/Canon service representative to replace it.

Office Equipment... | Answered 1 hour ago | 436 views

Try cleaning the encoder ruler with distilled water and a very soft cloth.

Office Equipment... | Answered 1 hour ago | 134 views

Not finding what you are looking for?
kawasaki Logo

Ask a Question

Usually answered in minutes!

Top kawasaki Office Equipment & Supplies Experts


Level 3 Expert

8081 Answers

Cindy Wells

Level 3 Expert

5838 Answers


Level 3 Expert

84543 Answers

Are you a kawasaki Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides