Karcher Logo

Karcher Recent Questions, Troubleshooting Help & Support

Do you work here? Claim your company

  • 288 Products
  • 3K Answers
  • 209K Views

it is possible the rewinding spring broke .

Karcher Hose... | Answered on Feb 13, 2018


The motor has a fan on the top to cool it off and it is usually pressed on the shaft, they can come loose. The impellor on the motor may have come loose, there may be something stuck in the impellor area. Some of the motors have pressed on parts and cannot be repaired.

Karcher Vacuums | Answered on Feb 05, 2018


Sounds like it has been left with detergent in the pump and it has dried out and clogged. Always run fresh water through the detergent pump after use.
You will need to take the detergent pump apart or you may be lucky with water flushing through it.

Karcher... | Answered on Jan 19, 2018


Seams like water pressure switch gem check the water inner filter maybe block.

Karcher Garden | Answered on Jan 16, 2018


Replace the seal

Karcher Plumbing | Answered on Jan 14, 2018


This video maybe helps you. Try to watch the video very carefully. Otherwise, you have to buy a new pressure washer surface cleaner. Before buying a new surface cleaner plz read buying guide of pressure washer surface cleaner

Karcher Garden | Answered on Jan 11, 2018


ok ok the heater won't fire. ya burnt the element out that why it won't fire, get used to cold washes or get it fixed.

Karcher Garden | Answered on Jan 06, 2018


i rekon you have burnt out the heating element inside so you will have to just do cold washes.

Karcher Garden | Answered on Jan 06, 2018


i did and thanks - just picked up one that does the same thing and i plan to take your advise

Thank you Jerr

Karcher 2500 PSI... | Answered on Jan 02, 2018


Take the wand hose off the washer itself and you will likely find a filter outfit that gets plugged up. Take it out and clean it real good. Mine was full of stuff out of the hose that gets in when the hose lays on the ground and stuff gets in. Also if hose has been used to drain anything. My filter was plugged and with the pressure it created the washer would not shut off. There could be a filter in the wand area in some models.

Karcher Garden | Answered on Dec 31, 2017

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Karcher Experts

Marvin
Marvin

Level 3 Expert

84540 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18429 Answers

Brad Brown

Level 3 Expert

18031 Answers

Are you a Karcher Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...