After system reset, how do I preset stations on my ux-d327b jvc hi-fi
You can only preset stations one by one. First, you can do a full scan for all stations in range. Press and hold the Stop button on the unit. Press Play/Pause to start the scan. (There are alternate methods using the remote control. See page 17 of the manual.) Press Fast Forward or Fast Reverse on the unit to navigate through the stations that have signal.
To set a preset, tune in a station using the Tune+/Tune- buttons on the remote or Fast Forward/Fast Reverse. Then press and hold Prog/Preset on the remote. When you see ##Empty or a preset number, use Tune+/Tune- to select one of the 20 preset storage numbers. Press OK/Play/Pause to save the preset. (If using the buttons on the unit, press Fast Forward/Fast Reverse to select a preset location. Press Play/Pause to save. You will see Stored on the display in either case, if you successfully saved the frequency to the location.
ManualsLib has the manual for the JVC UX-S327B here:
https://www.manualslib.com/manual/1939546/Jvc-Ux-D327b.html#product-UX-D327B . See page 18 for presetting stations.
I hope this helps.
Cindy Wells
6/5/2022 4:42:23 PM •
JVC Audio...
•
251 views • 0 helpful votes
JVC KD-G421 - cannot access menu to add ext-in
The JVC KD-G421 only shows the option to change EXT IN from the CD changer to EXT IN when the current source is FM, AM or Disc . See the following page at ManualsLib:
https://www.manualslib.com/manual/81662/Jvc-Kd-G421.html?page=15#manual . Assuming the J-Link cable that you added is the KS-U57 or KD-US58, the unit is still looking for (and not finding) the CD changer. Press the SRC button repeatedly until you get to FM or AM. (Disc will only show if there is a CD in the CD slot.) Then try pressing and holding Sel. Use the fast forward/up or fast reverse/down to get to EXT IN on the display. Then turn the tuning knob until EXT IN is selected. Press Sel again to save the setting. Now see if the EXT IN is listed when you press the SRC button. Page 13, https://www.manualslib.com/manual/81662/Jvc-Kd-G421.html?page=13#manual , shows the general procedure for setting the preferred setting mode.
I hope this helps.
Cindy Wells
Trying to find the universal remote code for my JVC TV. Model number HD-70FH96, thank you.
Remote Control Codes For JVC TVs
- JVC 3 Digit HDTV Remote Codes. 065. 067. 089. 013. 054. 055. 060.
- JVC 4 Digit HDTV Remote Codes. 1227. 1130. 1131.
- JVC 4 Digit TV Remote Codes. 1080. 1092. 1117. 1131. 1235. 1288. 1299. ...
- JVC 4 Digit DVD Remote Codes. 2097. 2115. 2166. 2204. 2206. 2017. 2028. ...
- JVC 4 Digit VCR Remote Codes. 3060. 3067. 3118. 3121. 3122. 3123.
..
How do I remove the platter on a JVC L-F130
Most platters and turntables use a friction fitting. Basically It's pushed on. The centre spindle has a slight taper on it so the platter grips tighter the farther down you push it. Lift the lid out of the way, off altogether if you can. Get a helper to hold down the body of the turntable with one hand and push their thumb of the other hand down on the tip of centre spindle. While they do this you grip the outside edges of the platter on opposite sides and firmly pull UP. **Caution** The platter might let go suddenly so warn your helper AND be ready for it.
4/26/2022 4:31:17 PM •
JVC Audio...
•
75 views • 0 helpful votes
Not finding what you are looking for?