JVC GZ - Recent Questions, Troubleshooting & Support - Page 6

Hi, I think your battery is 100% OK, if the power supply is perfect there may be problem with the switch, clean it with contact cleaner spray often press the switch several times. if the switch contacts are not connecting, this will help it to clear it. open the cam, check the power supply on the main board, there is a small fuse on the circuit board test it with. eventually we have to suspect the mother board. if so should change it.

Hi, first of all my advice is: if you keep any electronics devices without usage for a long period, you must detach the battery/power supply. in this case I think the hard disk may be faulty, if you can open the camera and takeout the HDD connect with an HDD dock connect the dock to your system, in normal condition your computer will detect the hard disk, if so you can save the contents to your computer or you can format it, if it is not detecting your computer it means the HDD is physically damage. please change it.

Hi, please write the question in English.

available with JVC website.

hi, it does n"t matter a lot of software is available on inter net, you can find it in google search.

sir, you may please re-set your cam to factory default, it will help to override the problem.

you will have to down load a driver for your camcorder or the computer will not recognise it . Make sure that the programs is compatible with the unit.

You do not need to buy, you may download the drivers for your camcorder from this link

http://www.pricecomparehelp.com/page/3458.html

Just click the download icon below the picture and select run to install the drivers.

After drivers are installed, plug your camcorder to your computer and turn the camcorder on. Wait until it finishes installing the drivers for your camcorder.

Now click start, then camputer you should see several icon with one having all or part of your camcorder name model.

If you double click on this icon, you will find one or more folders. Now you can download, delete etc all of the pictures or videos stored on your comcorder.

GOOD LUCK!!!!!!!

if when you say drive you mean DVD or CD drive then you might not have to install from CD if you go into your control panel then Device manager you will find your DVD drive there, then if you right click an go to properties then to driver, then update driver it will ask you to search on the internet. search on the internet an hopefully it will find the drivers for you. if this does not work you can al so try windows update this sometimes works as well. bet of luck :D

Asoftech data recovery program can recover data from formatted, lost or damaged hard drive or partition, Ghost hard drive .# Recover lost, formatted or deleted ( word ,excel ,ppt, office document, video zip, photo files etc ) from hard drive, Support USB recovery and other disk recovery .http://www.asoftech.com/adr/

if u use windows 7 or higer, cd not need, if this not help, just go to control panel, device manager u will see bad drivers. go to this drivers, see hardware ID. than type in google drivers by hardware ID and u will find ur drivers

Although the instructions don’t make it clear, it seems to be important that the camera is turned off before you connect or disconnect the USB cable. The instructions do mention that you should not delete or rename files on the camera except in the EXT_MOV folder. The camera’s firmware is apparently quite fragile about file names and the presence of the extra hidden folders that both the Windows and Macintosh operating systems create when you delete something.

http://wareseeker.com/free-jvc-everio-gz-mg-330/

For broken files, everio will prompt you to recover once switched on. If you mean deleted by accident, you can use file recovery software like Final Data Enterprise and a lot more. Mostly can be recovered, sometimes 80% or 90% of your total recording. Good Luck

If you have not used it since it was deleted , there is a good chance they can be recovered. if you have recorded on it since you may still recover some files . Down load a free program called recover, hook up the camcorder to a pc and run the program through the camcorders or HD or chip any files recovered will be displayed.

Depends how old or what model your DVD player is ? When I burn DVD's with my video editing software on my computer,some disks will not play on certain older DVD players, has something to do with video codes that the DVD player has to read? My experience is that my older DVD players will not play burnt DVD's from my computer, but will play in newer DVD players ?