Hi my name is darrell
ou need to sink firs hold the buttin in till it flashis gren and red the go to the phone search bluetooth device it will then go green and should be connect
Do you sell the rubber piece that covers the part
usually to are not sold separately, if your device is still under garantee contact your supplier for a free replacement of the complete phone device. i know that plantronics will even let you keep the charger and send you a complete new package.
How do I put my
First what model do you have? Most devices have you press and hold a button until you get a specific flash (either rapid or blue/red,etc) when you get that go to your phones bluetooth menu, search for devices and select what comes up. If the pin code 0000 or 1234 do not work consult your devices instruction manual
Will not take a charge
same problem here....no charge.
blinks dim red. returned it and the second one does the same thing.
Help anyone?
gl
How do you get the bluetooth to link to phone
You see, some time ago I wrote general guidelines on how to pair a generic bluetooth headset with a phone or computer. They can be found
here. If they happen to not suit your needs, please, let me know your headset's maker and model. I'll try my best to fetch detailed informations about it for you.
Regards,
Carlos
My Just Wireless BT-15K will
heres wat u do shove the whole thing including the box up there *** then by a different headset from another store :)
10/31/2011 2:46:57 PM •
Just Wireless...
•
Answered
on Oct 31, 2011
•
1,116 views
Will a Bluetooth wireless headset work with a
yes, for you to use a bluetooth headset with any mobile phone, it has to be bluetooth enabled so it can have a means of connecting to the headset.
although, majority of the blackberry phones that are known should work with certain bluetooth headsets since they do not comprise of just simple mechanisms like normal mobile phones. that is just about the same way that iphones usually select special types of bluetooth headsts to work with
hope this answered your question, please rate
Lots of static and low
I would simply test the device on another model of phone to see if the issue carries across, if it does carry across to another phone you have isolated the problem. If not it could be an issue with the phone, if it is the unit I would locate your reciept and call the company for a warranty.
Regards,
How do I put the Bluetooth into dicoverable mode?
Most of them you either have to hold the main button for a certain
amount of time like 5 seconds or so, until the light blinks steadily.
Then go to your phones setup on it's bluetooth and it will let you
know to place it into discover mode, say yes and it should see
your headset, then follow your phones instruction on completing
setup.
I hope that I understood your question.
I cannot get the bluetooth in pairing mode
Each Bluetooth headset is different when it comes to this, you'll have to check your user guide for the correct combination and timing of buttons. If you don't know where your user guide is, (shame shame!), then try some of the more common ways to get into pairing mode. Hold down the main button until the light flashes rapidly (3 seconds or less between flashes). If that doesn't work, try pressing and holding the main button and the +Volume button at the same time until the light flashes.
I have a bt-10 i have let it charge for about 4hrs
Check the manual that came with it. (You DID save the manual, right?) It should tell you just how long your supposed to charge your headset, as well as how to turn it on properly. I have a Plantronics Bluetooth that seems to take forever for the On button to work, but it works just as specified when I time it.
I have the just wireless blue bt-35k2 headset and
To put the bt-35k2 headset in pairing mode, press the ON button but hold it down for about 6 seconds. Once detected, you'll be prompted for passkey; then use 0000. Pairing will complete once authenticated.
7/17/2015 12:26:44 AM •
Just Wireless...
•
Answered
on Jul 17, 2015
•
1,788 views
Not finding what you are looking for?