Juniper Networks Answered Questions & Fixed Issues

error 73 =check alignment of magazine

email me [email protected]

No you cant, even if you reset the box it requires the default username and password. If you could brief me about your issues let me give you the solution

Green for full duplex, amber for half or error and red for down

Setup a proxy server and black list facebook.com that is the easiest way. Route all users to the proxy server and set premissions that does not let them change the proxy settings.

This question is very broad but if you are finding blocked domains it is usually due to DNS black listing and a proxy server. or just a proxy server. If you have access to the proxy server you can remove the domains from the deny list but if you don't you might be able to contact your IT administrator and request them to be unblocked.

Unless you are very tech savy and know what you are looking at the gripper can not be aligned without speciality tools. You can see if everything seems to be aligning correctly by removing the CD box cover and slip in a CD and watch the spindle and gripper come together but be very careful that you don't get flashed by the laser could cause eye damage. Also being careful when pulling apart and putting back together not to warp anything which could leave the CD play useless.

I would save it for when you find a spot of rust on your car, or someone scratches it somewhere and you cannot afford to have it repaired. Just whack the sticker on and presto! Problem solved!

Theft?

if you are using juniper netscreeen 5gt then please follow the below link :http://kb.juniper.net/InfoCenter/index?page=content&id=KB4320

pleas use this link: http://kb.juniper.net/InfoCenter/index?page=content&id=KB4320

hi
you want to create security policy between the wired interface and wireless interface.

eg:

wired is trust interface
wireless is wireless interface.

create a rule between trust to wireless.
as well as rule between wireless to trust.

Reagrds,

Mani.S

you can do it by just reseting the device using pin hole back in the device.

A new ID, meaning a new profile? Is it a temp profile?

You need a service manual. Thats a must if you own any jukebox. You may be able to find one in print or cd on ebay. Shop around, they vary in price and you can find one reasonable if you try.

Sounds like you have it under control, so what is the problem?

Sorry to tell you that won't happen.Bite the bullet and reset to factory specs

Remember, you need to configure DNS on the ScreenOS device before the address book items can resolve the DNS to an IP address. In this example, we assume the hostname is SSG5, the domain name is abc.com, the primary DNS is 1.1.1.1, and the secondary DNS is 1.1.1.2
Click Network > DNS Host Name: SSG5 Domain Name: abc.com Primary DNS Server: 1.1.1.1 Secondary DNS Server: 1.1.1.2 Click Apply Click Objects > Addresses > List Select Untrust Click New Address Name: www.facebook.com Click domain name, and enter www.facebook.com Zone: Untrust Click OK
Click Objects > Addresses > Group Zone: Untrust Click New Group Name: Facebook Move www.facebook.com from Available Members to Group Members by clicking the << button Click OK
Click Policies Select From Trust to Untrust, then click New Source Address: Click Address Book, and select ANY Destination Address: Click Address Book, and select facebook Service: ANY Action: DENY Click OK
hope this helps you

If you forgot the password for your router, you have to reset the router and reconfigure it again.

The router supports SNMP so any SNMP performance tool will pull the data. MRTG or PRTG are the old standbys but they are Unix tool and annoying to setup on Windows. You can try http://sicm.sourceforge.net/, or http://www.snmp4tpc.com/getif.htm (I use this for basic discovery and checking one or two variables).