Juniper Networks Logo

Juniper Networks Popular Questions, Answers, Tips & Manuals

Do you work here? Claim your company

  • 92 Products
  • 70 Answers

error 73 =check alignment of magazine

Juniper Networks... | 382 views | 0 helpful votes

email me

Juniper Networks... | 283 views | 0 helpful votes

Green for full duplex, amber for half or error and red for down

Juniper Networks... | 311 views | 0 helpful votes

Unless you are very tech savy and know what you are looking at the gripper can not be aligned without speciality tools. You can see if everything seems to be aligning correctly by removing the CD box cover and slip in a CD and watch the spindle and gripper come together but be very careful that you don't get flashed by the laser could cause eye damage. Also being careful when pulling apart and putting back together not to warp anything which could leave the CD play useless.

Juniper Networks... | 62 views | 0 helpful votes

This question is very broad but if you are finding blocked domains it is usually due to DNS black listing and a proxy server. or just a proxy server. If you have access to the proxy server you can remove the domains from the deny list but if you don't you might be able to contact your IT administrator and request them to be unblocked.

Juniper Networks... | 156 views | 0 helpful votes

Setup a proxy server and black list that is the easiest way. Route all users to the proxy server and set premissions that does not let them change the proxy settings.

Juniper Networks... | 167 views | 0 helpful votes

if you are using juniper netscreeen 5gt then please follow the below link :

Juniper Networks... | 163 views | 1 helpful votes

you can do it by just reseting the device using pin hole back in the device.

Juniper Networks... | 81 views | 0 helpful votes

I would save it for when you find a spot of rust on your car, or someone scratches it somewhere and you cannot afford to have it repaired. Just whack the sticker on and presto! Problem solved!

Juniper Networks... | 47 views | 0 helpful votes

A new ID, meaning a new profile? Is it a temp profile?

Juniper Networks... | 37 views | 0 helpful votes

Sorry to tell you that won't happen.Bite the bullet and reset to factory specs

Juniper Networks... | 1,529 views | 0 helpful votes

Remember, you need to configure DNS on the ScreenOS device before the address book items can resolve the DNS to an IP address. In this example, we assume the hostname is SSG5, the domain name is, the primary DNS is, and the secondary DNS is
Click Network > DNS Host Name: SSG5 Domain Name: Primary DNS Server: Secondary DNS Server: Click Apply Click Objects > Addresses > List Select Untrust Click New Address Name: Click domain name, and enter Zone: Untrust Click OK
Click Objects > Addresses > Group Zone: Untrust Click New Group Name: Facebook Move from Available Members to Group Members by clicking the << button Click OK
Click Policies Select From Trust to Untrust, then click New Source Address: Click Address Book, and select ANY Destination Address: Click Address Book, and select facebook Service: ANY Action: DENY Click OK
hope this helps you

Juniper Networks... | 1,303 views | 1 helpful votes

Sounds like you have it under control, so what is the problem?

Juniper Networks... | 224 views | 0 helpful votes

If you forgot the password for your router, you have to reset the router and reconfigure it again.

Juniper Networks... | 143 views | 0 helpful votes

The router supports SNMP so any SNMP performance tool will pull the data. MRTG or PRTG are the old standbys but they are Unix tool and annoying to setup on Windows. You can try, or (I use this for basic discovery and checking one or two variables).

Juniper Networks... | 174 views | 0 helpful votes

Connect a PC to the router either by wireless or wired connection (You need a standard ethernet cable to do this connected to port 1) and then open a web browser. In the browser go to and enter 'Admin' as the username and leave the password field blank (default settings) (If you have changed the password and username, you can use the new ones or if you forgot, you can press the router reset button for default confirmation to return). On the Network Settings tab, turn off 'Enable DNS Relay', This is actually the easiest way to disabled the NAT. Once you disabled it, you can use your router as a Network Bridge. The trick is to disabled the WAN feature which is the normal function that the router does during NAT OR DNS. If none of this information is helpful, why not try calling their technical support, I've had nothing but (relatively) good experiences with them. The phone number in the US is 877-453-5465

Juniper Networks... | 245 views | 0 helpful votes

use S/N as username and password

Juniper Networks... | 390 views | 1 helpful votes

You can actually null the applications call home ip address this will filter it entirely.

Juniper Networks... | 599 views | 0 helpful votes

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Juniper Networks Experts

Gopi Venkatesan
Gopi Venkatesan

Level 2 Expert

74 Answers


Level 2 Expert

567 Answers

J John

Level 2 Expert

299 Answers

Are you a Juniper Networks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides