Policy-based VPN over vrrp
Hi krisva2,
If any of the articles show just the
Juniper logo and menu bar you will need to shutoff your ad blocker.
Is Virtual Router Redundancy Protocol
(VRRP) supported on Juniper firewalls? (KB ID: KB10892)
http://kb.juniper.net/kb/documents/public/resolution_path/J_FW_VPN_Config_or_Trblsh.htm
This is probably what is going on with
your setup but without more information I could not be 100% sure.
Established sessions need to
re-establish when the VPN Redundant Gateway fail-over occurs (KB ID:
KB6372)
Enjoy!
Nsm 2000 jukebox
You need a service manual. Thats a must if you own any jukebox. You may be able to find one in print or cd on ebay. Shop around, they vary in price and you can find one reasonable if you try.
We are not able to
If you forgot the password for your router, you have to reset the router and reconfigure it again.
Hi ; is there a
The router supports SNMP so any SNMP performance tool will pull the data. MRTG or PRTG are the old standbys but they are Unix tool and annoying to setup on Windows. You can try http://sicm.sourceforge.net/, or http://www.snmp4tpc.com/getif.htm (I use this for basic discovery and checking one or two variables).
We have a Juniper netscreen 5GT and our speed
Connect a PC to the router either by wireless or wired connection (You need a standard ethernet cable to do this connected to port 1) and then open a web browser. In the browser go to 192.168.0.1 and enter 'Admin' as the username and leave the password field blank (default settings) (If you have changed the password and username, you can use the new ones or if you forgot, you can press the router reset button for default confirmation to return). On the Network Settings tab, turn off 'Enable DNS Relay', This is actually the easiest way to disabled the NAT. Once you disabled it, you can use your router as a Network Bridge. The trick is to disabled the WAN feature which is the normal function that the router does during NAT OR DNS. If none of this information is helpful, why not try calling their technical support, I've had nothing but (relatively) good experiences with them. The phone number in the US is 877-453-5465
Not finding what you are looking for?