I thought the battery had
JJ do have a warranty but I do not know how long you have had your watch. Its always best to send your watch back to original vendor, especially on a more expensive watch. Any other repair done by outside sources can and will null and void the manuf. warranty. I would HIGHLY suggest the link below: The price is very resonable for the s/h.
http://www.jjwatch.com/watchRepair.asp
good luck
WHERE I CAN FIND A
Try this or they might be able to direct you further:
Is this your company?
Claim This Profile
Gold Cat Jewelry
19105 Kishwaukee Valley Road
Marengo,
IL 60152-9211 map
Phone:
(815) 715-6186
Watch does not work after changing the battery
mcdevito75 here, You can try, double check the battery instalation in the watch, If all is good, try to pull out the stem and move the hands as if setting the time, then push stem back in. It"s also possible you have a weak or even dead battery, even though it was bought new.
Where can i place an order for jj watch band (5001YG)
The only place you can get an original band for a watch is from the actual watch vendor. If its more then a few years old, it may even be discontinued.
Jules Jurgenson Corp
(610) 667-3500
101 W City Ave
Bala Cynwyd, PA 19004
Good luck.
I own a gold tone diamond accent jurgensen(like
you can buy on line try ebay extra long strap 8mm or through the manufactors you should have no problem state buckle color as well a company called Hirsch sell high quality straps and bracelets they surply most of retail high end companys with their straps.
Some one has over wound my gradads railway pocket
Possibly the mainspring has been broken. I am guessing that you cannot see what has come loose. The only way is to open the case back and see. If that is what has happened then it can be replaced.
How do I change the battery of a Jules Jurgensen pocket watch.
First you have to get an eyeglass and examine watch caseback. Can you see the joint or is it monoblock? If there is joint, get strong knife and press into it. Some of watch casebacks are very tight, so, apply great pressure but do not let the blade slip or you will damage the movement.
If the case is monoblock, then you have to open it from dial side.
Be very carefull when doing it as any slip of the blade will damage your watch.
Good luck.
New watch..Jules Jurgenson day-date..the stem cap is loose.
remove the cap and put a tiny drop of locktite glue on it. spill some glue onto a piece of glass or an old plate and use a sewing needle to put a tiny drop of glue in the hole then screw it back on and wait till the remaing glue on the glass is gone hard before pushing the stem back in .. this last bit is important so as not to glue the stem to the watch. if this helps please rate me joe
Replacement for the folding clasp
Go to this link and identify your closest retailer.
http://www.julesjurgensen.com/Retailer.asp
They should stock many items and be able to get all others if still in stock.
If not then most jewelers could make one up, perhaps as good as the original, but i would expect it to be quite pricey.
Hope this helps :)
Not finding what you are looking for?