Juki Sewing Machines - Page 5 - Recent Questions, Troubleshooting & Support
Juki MO654DE locks up and will not turn
Remove the needle is possible.
Force it in the normal direction of travel with the handwheel. You can't break it. This tip from a dry cleaners that does repairs and has 6 machines.
Then run the machine full speed with no needle for about 20 seconds.
I removed your duplicate post. When you submit a question, you have to press Refresh to see it.
How to adjust the stich lenght on a juki ddl 553 strite stich.
I still don't understand this. I have acquiured a juki DDL 553 recently to discover I have no idea how to change the stitch length and that there is no reverse stitch. I have pressed the black button and have tried to turn the side?( the wheel?) but when i push down on the black button there is no way to turn the wheel it doesn't move, maybe there is some other part I'm supposed to be moving??
Why lots of oil leakage?
There might be a mechanical problem with your sewing machine to oil to be leaking and it needs to be repaired and the part that stops the oil from spilling out needs to have something sealing it then too to stop oil from leaking out.
Hi! I have a Juki HZL-25Z. The under side of my fabric is getting birds nest. So I know its the top tension but I have no idea how to fix this!
To be sure it is top thread, suggest you try a thread of a different color other than the bobbin.
Assuming its top thread, you need to increase top thread tension.
Other causes; Uneven feed of top thread can cause nesting of top thread. The machine uses a horizontal spool for top thread. Be sure you use a spool cap that is as big or larger than the spool. Pay particular attention to threading instructions on which direction the thread drops from the spool. If backwards, flip spool.
See following video, testing tension
https://m.youtube.com/watch?v=YF7EOCvpHLg&feature=youtu.be
Comment below for further assistance.
Error 924
hi there
regarding Error E924 at JUKI control it means Motor driver failure ( Motor driver has broken.) or you can first check motor connection if connected secure or there's lose connection. other ways try to change motor with new one or check control box only with working machine to confirm Error coming from motor or control box.
BEST REGARDS
ASHRAF
CAIRO - EGYPT
[email protected]
Not finding what you are looking for?