Can you get a walking foot attachment for a Juki industrial sewing machine
To attach the foot: First Hold your Walking Foot and raise its Lever. Keep the lever raised and hook the walking foot around the shank / presser bar. Slide the foot up and down until you've lined it up with the hole, so that you can insert the set screw. Put the set screw in and tighten with the screwdriver.
Checking the oil level on a juki ddl-8700
Hi there, gently tilt the head of your machine back and rest it on the white peg thing at the back. Inside you should see lines on the back side of the oil pan...min and max. If you are somewhere in between, all good. If not, add more. NOTE: always use clear machine oil. Any other stuff will stain your work. Hope this helps, have a great day
Stretch stitch juki 8700
Hi there, no you cannot do a stretch stitch on the ddl-8700. It only has on stitch and it is a straight lockstitch.
Juki instructional manuel
Hi Cathy Nichols, indicates which Juki model you have, in order to find the best possible answer
Regards Franco Dosil
Hola Cathy Nichols, indica que modelo de Juki posees, para poder encontrar la mejor respuesta posible
Saludos Franco Dosil
Juki e6 error
What is the E- 6 error in juki DDL-8500 chaina Machine
Hello! I have a Juki DDL-8100 e. the thread is constantly breaking when I go through thicker fabric - bobbin seems loose too.. could anyone help?
I'm not familiar with this machine but it sounds as though your top tension is too tight so that when you sew through heavy material the thread isnt slack enough to go through that extra thickness and so simply snaps. Try reducing the tension a little at a time and see how your stitching is affected.
Another issue might be that you are trying to sew a heavy fabric and using too light a thread. You need to match your thread to the job in hand. For a thicker thread you need heavier top tension. If your machine has been correctly serviced you should not have to alter the bobbin tension at all under normal circumstances as thicker thread will automatically have a heavier tension as it goes under the bobbin case spring and so you have to match this heavier tension with a higher top tension in order to get a perfect lockstitch.
I hope this helps.
Juki tl2200 qvp mini problem with needle
Lower the presser foot.
Move the needle bar up to the highest position. Unscrew the needle clamp screw, Be sure to almost completely unscrew it.
Hold the needle with its long groove faced to the
left, insert the needle into the needle bar until it will go no further. Then, tighten the needle clamp screw.
Not finding what you are looking for?