Johnson Recent Questions, Troubleshooting Help & Support

Do you work here? Claim your company

  • 37 Products
  • 201 Answers
  • 5K Views

there never was one when I worked for dealership split lower unit to get to it shift rod has a coupler that has to be loosened then just pull apart care must be taken when putting back that water tube sleeves are in place also

Johnson Boating | Answered on Mar 12, 2019


the link is for water pump replacement on your motor this will show you how to remove the lower unit https://www.youtube.com/watch?v=Y7gDdObybok

Johnson Boating | Answered on Mar 10, 2019


the bendix gear should be available at any starter/alternator rebuild shop

Johnson Boating | Answered on Mar 04, 2019


A little hard to say.. Should clear on its own. Try disconnecting the batteries for an hour ... if I remember correctly there are different types of bedpan for each malfunction.... Long and on to short beeps in different sequences. One thing that makes a boat act like it has a gremlin is a failing thermostats... Chevy Serra does the same backwards flips. So if the batteries load test good and the connections are solid then I'd be checking for a partially plugged thermostat or restricted cooling line or failing water pump. ( change at least every three years , ) costs a few hundred dollars to service an engine , takes a lifetime to row back in.

Johnson Boating | Answered on Dec 26, 2018


THE HIGH SPEED IDLE LEVER OR THE BATTERY

Johnson Boating | Answered on Dec 12, 2018


I feel your carburettor has a faulty float. It allows the gas to keep flowing till the engine is full or flooded. The float is made to cut the flow of gas off when the engine shuts down.

Johnson Boating | Answered on Nov 24, 2018


Before 2008. Last sold in 2007.

Johnson Boating | Answered on Nov 21, 2018


CHANGE THE LINKAGE JUST A BIT

Johnson Boating | Answered on Nov 20, 2018


These engine adjustments vary by year, but the later models had their idle RPM adjusted with the boat in the water to account for exhaust back-pressure. Actual idle speed is set by adjusting the Idle Timing while the unit is in gear in the water. Check the service manual for actual timing specifications, the owner's manual won't have this information.

Johnson Boating | Answered on Nov 20, 2018

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Johnson Experts

yungtek

Level 1 Expert

47 Answers

Brad Brown

Level 3 Expert

18002 Answers

NOEL
NOEL

Level 3 Expert

8398 Answers

Are you a Johnson Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...