Jobo Giga - Popular Questions, Answers, Tips & Manuals

First of, I suggest you use USB Flash Drives of High Value., like 500 to 1G. Or a second Hard Drive 2G. If you lost 40G of data, it is gone. Just remember to use the EJECT format to remove all external devices. If you do not, you can loose data.

As long as the connection format is the same as the original player you should have no problem at all. Simply fit the new hard drive and make sure to format it using the device settings.

Hope this helps and thank you for using FixYa

electronic injection pump of 6wa1

It needs to be formatted. YOU NEED TO FORMAT IT.

Did you take the screen apart to clean it? did it happen on its own? How old is the device are you still in warranty?

you need to go to the jobo site, find the driver/software/service link, in that you will find the giga one formatting tool, download and use that. i had the same problem when i purchased my original giga one, i used windows to format the drive - but as people find out windows is unable to format the drive correctly ie fat 32, and you then get an error message. in the formatting tool it tells you why what the different error codes are and error 1 means drive not formatted to fat 32, im not sure how old your giga one is but when i purchased mine approx 4yrs ago it never came with a proper manual and there was no support on the jobo site at the time. I think a lot of these minor problems could be avoided if it came with a manual and explained whats needed to clear the internal hard drive

Have you talk to Linda?
Try [email protected]

If the Giga Vu hangs, hold down the two end buttons of the 5 along the bottom, then press the power button for a few seconds. This should now turn off the device. Give it a few seconds then turn it back on. Some times I have to plug in the power for a couple of minutes before turning it back on.

removed the battery & put it back after 42hrs.. just to reset and delete the settings you made there..

Post back again, & feel free to contact me..

~pinc

hello sir

this model SA rather than SC seems to be a Middle East model. The SC version doesn't have DAB. https://www.google.com/search?q=panasonic+sa-pm250+instruction+manual ..

Question edited for clarity, typo and CAPS. Question moved from Cars and Trucks category. Claim on the warranty irrespective of how long you have had them. They charge $180 but they cost them $20 to buy from China. Package them up and send them tracked and ask them to replace the batteries. How long is the warranty on AfterShokz? While we hope you never need it, all new Shokz purchased from authorized retailers come with a two-year warranty that begins on your date of purchase. Jan 11, 2019

How To File A Warranty Claim For Your SHOKZ Headphones

https://www.google.com/search?q=Openfit+Shokz+battery+replacement ..

1. Power Off: Turn off the device.
2. Jumper Configuration: Locate the jumper labeled "S16" on the device. Initially, it should be connected to pins 2 and 3.
3. Power On (Alarm+All LEDs Flashing): Turn the device back on. You'll see the alarm LED and all other LEDs flashing.
4. Power Off Again: Turn off the device once more.
5. Jumper Adjustment: Change the jumper configuration from pins 2 and 3 to pins 1 and 2.
6. Finished: Your Porpo YH-2000 is now set to the desired angular unit mode.

If you encounter any issues, you can press the reset switch on the back of the device to reinitialize it.

If the display is working, you have audio. Check your amplifier. 1300Watt adaptor ... This unit draws a very low power and that is not needed.

The F2100 remote is not explicitly listed as compatible with the AerialBox T2100, I recommend using the remote that came with your AerialBox T2100 for optimal functionality. If you have any specific compatibility concerns, I suggest reaching out to Dish TV customer support for further assistance.

Are you using the charging cables that came with it? That is a type C. Are you securely attaching the charging cable? A loose connection would keep the battery from charging. If you had a low battery, you would see a red light. That you have no light at all suggests there is no charge left in the battery. I'm not sure the reset will work with no charge which is why you ought to check the cables first. But turn it off and then hold down the Multifunction button for 10 seconds to reset it. Then turn it back on and see what happens. If you can, test the charging cable on aother device. If you have another type C charging cable, try it, just to eliminate a bad cable. If these suggestions don't work, you may try the manufacturer's customer support.

Question edited for clarity, 'make model (what it is)'. The images show the rear connections. It looks like 2 x 1/2" jacks and a multi-pin connector for a sound mixer. I have never heard this term before? Passive stage monitor. Uses speakon connection. It is this

Speakon connector

Wikipedia https://en.wikipedia.org > wiki > Speakon_connector Speakon connectors arrange their contacts in two concentric rings, with the inner contacts named +1, +2, etc. and the outer contacts connectors (in the four- ... The company has disowned it! https://harbingerproaudio.com/manuals/

Harbinger HX121M 12" Stage Monitor

Musician's Friend https://www.musiciansfriend.com > pro-audio > harbinge... 12" loudspeaker featuring a 2.5" high-temperature, precision edge-wound polyamide voice coil and an 80 oz. vented magnet structure.

Harbinger HX 121m Passive monitor

Reverb https://reverb.com > Pro Audio > Speakers > Harbinger Passive stage monitor. Uses speakon connection. ..

All questions need clear 'make model (what it is)' first 3 words. https://www.google.com/search?q=fmdott085+V398 ..

Set Time Hours and Minutes: Press Time/12/24 and Alarm1/ON/OFF buttons at the same time for two seconds and it will start to blink the hour. Press and hold the button for a fast setting or tap it briefly to increase the setting by one hour. Now set the minutes with time (press and hold) and min. How do I set the Audiosonic clock? Set current time Press and hold the time button and simultaneously press the hour to set the hours in 24-hour mode .