My PC with a V266B
You mean you have tried over clocking? If yes then the fan sensor and the clock speed are related. That is the reason the processor is not running and hence the coolant fan is dysfunctional. Revert back to old clock speed and it will be operational again.
Tried to start computer it won't boot and keeps
It's telling you something is wrong. The BIOS (Basic Input/Output System) is detecting something is already wrong. Usually, this could be the RAM is bad, there's no Keyboard or Display connected, or *********** board has gone bad.
Check the easiest thing first (connectors to peripherals). Then check the RAM to make sure it's not gone bad.
It's hard to say w/o doing a lot of testing on which component is causing the problem.
Display only works intermittently, used
Hello
The problem monitor, have you tried using it alone with the computer? Does the problem persist when the problem monitor is only connected monitor on the computer?
If so, then the power supply of the monitor is most likely faulty, but can quite easily be repaired by replacing any bulky or leaking capacitors on the power supply board inside the display or by purchasing another external power supply (depends on the monitor, most use a internal power supply, so you just have a cord that goes into the monitor.)
When and if you take the monitor apart, stay away from the 200 - 600 V big capacitor on the power board, it may hold voltage even after being unplugged for a long period of time.
Need a bios
try at jetway web site download driver from the libray jim
I AM HAVIG PROBLEM WITH MY MOTHER BOARD MY BOARD
try to reset bios by removing battery or by using jumper else directly move for warranty since there may be problem with graphics chipset too.
so get change your motherboard with the new one under warranty
My motherboard has not been
Few things you can do is the make sure the processor and the memory is properly seated on their slots. You can also take them off and then put them back. Also, try to change the cmos battery on your motherboard.
Please let me know how this goes.
Usb 1 2 3 or not working
Found that the people that put the computer together had not powed the port, the port worked but as it had now power no device wold appear to work, Changed the jumper to power the port and everthing is now working.
Thaks george
2/13/2010 7:32:47 PM •
Jetway MB...
•
Answered
on Feb 13, 2010
CL-2 94V-0 E241819 is screened next to the
what you have is a china no-name motherboard there are alot of these floating around. I've had a couple myself from shady builders there junk
if you can identify the board using cpuid try it
if you got some skill building pc's buy a new board, ram, processor, video card, and power supply if not a new basic desktop is cheep
No sound after reinstalling windows 7
Well seems that ur win7 does not have the drivers for ur jetway.. pls go to its support website & download the drivers for win7 for ur sound device
I have a jetway motherboard and usb1 2 3 are not
You can activate the usb function from your computer bios. Turn on your computer and enter your bios by keep pressing the del key on your keyboard. The go to Advance setup and look for usb function settings and turn it on.
I hope this could help you a lot..:-) Thanks..
12/23/2009 2:26:51 PM •
Jetway MB...
•
Answered
on Dec 23, 2009
Not finding what you are looking for?