Jetway Recent Questions, Troubleshooting Help & Support

Go to the Jetway website and download the relevant drivers for your motherboard.

1.try with a other Monitor.2.check all cabels so they are seated tight.3.check the videocard to be seated tight.4.are the videocard get the right power.5.the videocard can be brooken.

Try the page here:http://www.grotal.com/Jaipur/Jetway-IT-Products-C69/Good luck

Need more info. Is it your ceiling fan, radiator fan, desk fan, CPU fan, case fan or PSU fan. also what is the make and model of your motherboard. or you could buy a fan from your local computer shop. If you carry your broken one with you they will be able to sell you a matching item.

Replacing the bad caps and fan may fix the problem. My guess - you need a new motherboard/computer.

Helloo here is the homepage:http://www.jetway.com.tw/jw/motherboard_view.asp?productid=223&proname=M26GTM-3VPAny ATX power supply can be used here, the main connections is 24 pin, and all power supply will fit the mainboard.Try to download the manual, for detailed info about how to connect the power supply.Please take antistatic precautions, when working on the mainboard.A computer repair shop, can also help you with renewing the powersupply.Good luck

Suggest to test the unit with another power supply if possible. -Possible that power supply my be dead. If not possible then you will have to contact Jetway for a RMA for no power. Ref: http://www.jetwaycomputer.com/TechSupport.html

Hello here is the homepage:http://www.jetway.com.tw/jw/download_show.asp?productid=P4X400DBPI think maybe the graphic card has died.Try to add a new or used AGP graphic cardin the slot on the mainboard.Check also the screen/ or cable on another pc for fault.Good luck

Desktop or Laptop computer ?WARNING: Before you start troubleshooting remember that you are dealing with electricity that can KILL.

http://www.kitchentablecomputers.com/static.php - rules

Test all power and data leads that attach to your hard drive IDE,SATA

the leads from your (motherboard to your hard drive) make sure they have secure dust free connections and are not faulty

if its a 40 pin flat ribbon type it will be the first to fail

make sure all leads that are attached to your drives dvd\cd 3 1/2 inch floppy have secure connections and are not faulty

even something as small as a faulty electrical fan and its lead can cause you problems

computers need all power and data to continue through every working device and to have an end so any faulty leads will end up with a computer error

make sure your graphics card is securely seated with no dust built up or in the socket

if you remove your graphics check the socket to make sure its dust free

restart your computer then reinstall it this should activate found new hardware wizard

hope this helps

Hello the homepage is here:http://www.jetway.com.tw/jw/motherboard_view.asp?productid=35&proname=V2MDMPBut it seems that a bios update is not nessesary.But you can look for driver updateIn the box at the left.Good luck

In Windows? - New drives have to be readied for use. Try Start > Run (aka Search in Win 7) type dskmgmt.msc. Look for your drive there. It should be without a drive letter. Right clicking will give you the options of initializing, creating disc partitions, assigning logical drives, and formatting. If this seems a little daunting. A wizard should load. If not there is refresh icon on the toolbar.