Which fuel line goes where on a stx 900 jet ski
The specific configuration can vary depending on the model year and design changes. Additionally, providing incorrect information about fuel line connections could be dangerous.
For accurate information on the fuel line connections for your specific jet ski model, I recommend consulting the owner's manual that came with your watercraft. The owner's manual typically contains detailed instructions and diagrams on how to properly connect and route the fuel lines.
If you don't have the owner's manual or if you're unsure about the correct fuel line connections, it's essential to reach out to the manufacturer, a certified Sea-Doo dealer, or a qualified technician who can provide accurate guidance based on your specific jet ski model and its year of manufacture. Safety is a top priority when working with fuel systems, so it's crucial to ensure that the connections are correct to prevent accidents and damage to the watercraft.
11/23/2023 10:34:19 AM •
Jet Boating
•
Answered
on Nov 23, 2023
•
254 views
Jet ultra 3 turns on but lights just continuously flash.
INFINFB2045 Jet 3 Ultra Troubleshooting
https://www.pridemobility.com/.../
troubleshooting/infinfb2045_
jet_
3_
ultra_
troubleshooting.pdf
File Format: PDF/Adobe Acrobat
troubleshooting instructions for the
Jet 3 Ultra Power Chair. ... What if the systems on my
Jet 3 Ultra seem to be "dead" (controller does not
light up when the on/off key is ... you
continually allow the battery condition meter LEDs to fall into the red area, the ... 1
Flash. The batteries need charging. Check the battery connections.
10/5/2023 11:21:49 PM •
Jet Health &...
•
Answered
on Oct 05, 2023
•
497 views
Wheelchair support
First of all, you should be aware of your Center-of-Gravity. Many activities require the wheelchair user to reach, bend and transfer in and out of the wheelchair. These movements will cause a change to normal balance, center-of-gravity, and weight distribution of the wheelchair.
To determine and establish your particular safety limits, practice bending, reaching and transferring activities in several combinations in the presence of another individual BEFORE attempting active use of the wheelchair. roper positioning is essential for your safety.
When reaching, leaning, bending sideways or forward, it is important to use the casters as a tool to maintain stability and balance. When you are reaching, leaning and bending forward, position the casters so that they are extended away from the drive wheels and engage wheel locks.
Never attempt to reach an object if you have to move forward in the seat or pick them up from the floor by reaching between your knees. When you're reaching or bending backward, position wheelchair as close as possible to the desired object.
Position the casters so the are extended away from the drive wheels to create the longest possible wheelbase.
Reach back only as far as your arm will extend without changing your sitting position. When another person is tipping the wheelchair, he should grasp the back of the wheelchair on a non-removable part.
Inform the wheelchair occupant before tipping the wheelchair and remind them to lean back.
Be sure the occupant's feet and hands are clear of all wheels and/or any other pinch points.
Not finding what you are looking for?