Do Mirolin water jet tub
jets come out for cleaning ?
No they do not here is a simple way to clean the jets and the piping.
Regular Jet Cleaning
To clean the entire whirlpool system and tub exterior, follow this process every month or more frequently if needed. Don't let dirt and grime build up or you'll have more scrubbing to do to get the tub clean.
- Fill the tub with hot water, approximately an inch above the highest jet.
- Make sure the water temperature reaches at least 140? F (60? C).
- Add 1/2 cup of laundry detergent or the amount used to clean 1 load of laundry as recommended by the detergent manufacturer.
- Run the jets for 15 minutes.
- Drain the tub and refill with clean lukewarm water.
- Run the jets for another 15 minutes.
- Drain the bathtub.
- Dry the tub completely by wiping it down with a clean towel.
1/13/2017 7:21:33 PM •
Jet Home
•
1,234 views • 0 helpful votes
Can a 3/4 horsepower jet pump be operated at a 40/60 psi configuration?
Yes. First raise your tank pressure to 38 psi, then raise your cut-in pressure on the press switch to 40 psi. Don't forget to adjust the cut-off up to 60 psi. There is a schrader valve(tire valve) on the top of your tank where you can fill it and measure the press with a tire gauge. CHANGE TANK PRESS FIRST.
2/22/2017 1:31:24 AM •
Jet Plumbing
•
398 views • 0 helpful votes
Not finding what you are looking for?