Jensen Answered Questions & Fixed Issues

Bad connections or a bad amp

Set-up (Programming) procedure is too much to type in here, and is not practical and it will differ brand-to-brand remote controls. If you wish to get more; check the sites linked here. The site has set-up code list & set-up procedure to many popular brand remote controls. The site has general set-up codes to check with TVs and other devices are given, in the order of the 'device's brand name list' in alphabetical order. Set-up code list to many brand remote controls also is given. Pull up older posts. Search the sites by type in the brand name to your device in its search box at the top right part of the display window. It will help you to find the document easily. http://electro-medical.blogspot.com/

Jensen Mp3 player has qr code on screen, what do I do?

Set-up (Programming) procedure is too much to type in here, and is not practical and it will differ brand-to-brand remote controls. If you wish to get more; check the sites linked here. The site has set-up code list & set-up procedure to many popular brand remote controls. The site has general set-up codes to check with TVs and other devices are given, in the order of the 'device's brand name list' in alphabetical order. Set-up code list to many brand remote controls also is given. Pull up older posts. Search the sites by type in the brand name to your device in its search box at the top right part of the display window. It will help you to find the document easily... http://electro-medical.blogspot.com/

Are you sure it is the button? If it has a removable face, you may need to just take the face off and reinsert it. Wiggle it, see if it does wiggle.

There are many reasons why. 1. The power cable might be to small. I mean Gauge wise. (thickness) 2. Your GND (ground) might not be properly contacting to the chassis. The terminal should be secured to a free of paint clean metal surface (chassis) and tightly. 3. The amplifier might be driving a load that is not compatible with its specifications. Some amplifiers will play below their recommended OHM loads but tend to cut out when pushed, while others, will plain get damaged. Always use your amp within its parameters. 3(b) It is the way the sub woofer is connected to the amplifier that determines the OHM load that the amplifier will play. Check that your sub woofer connection to the amplifier is correct. 4 The amplifiers installed location may be preventing the required air circulation, which in turn results in overheating of the amplifier, causing the protection system of the amplifier to kick in and protect itself. (more volume requires more power which generates heat and if there is no cooling mechanism in place, make a very unhappy amplifier and unpleased owner) 5 There is always the chance that the amplifier itself might be faulty. There are more but these are the basics. Good luck dreamsystems

Find the harness. Your best bet. Hit the wrong wire with power(those pins are really close together) and you will no longer have a Jenson stereo.

Both resistors are: 1/4w 100 ohm with 5% tolerance (brown, black, brown & gold colors). Best to use the "Metal Film" type because they're more durable than the "Carbon Film" type.

If a cable speaker is shorted to ground or (in your case) the short was on the casing the radio mutes the output to save the amp. So remove all cables and put them back to the radio & connect the speakers one by one to see if it works or mutes again

Looks like if the harness snaps in from top...the top left would be ground... below that should be constant and right next to ground acc. FYI the harness on amazon is only $9

thanks just what i needed 2 know

recalibraite it or get a new one

check with a or your medical doctor

DIFFENGUNARI

http://www.uneeksupply.com/Jensen-VX7021-Radio-Parking-Brake-Bypass-to-watch-video-in-motion-_p_41815.html


this is what you need to bypass the sfety feature. Note this is for off road or show purposes only. Having video playing within view of the driver is ******* in moststates and is dangerous.

QUICK SEARCH
Turn device on
Press and hold [SET] button, then press and release DEVICE button eg tv, vcr , sat, aux
release [set] point the remote at device and pres [POWER] or [PLAY]
until device turns off or plays
Press [ DEVICE] to lock up the code
check other buttons

it depends on your coverage. contact an independent agency to better understand what the rules of NC insurance states. many times, the policy holder doesnt "get" what the policy covers so you very well may not be covered here. but an independent agency will help you out best. Massachusetts Insurance Agency

Good. It is a grand set. Keep it. Never allow anybody even to touch on it.

There is a display button on the unit, if that does not dim the display, there is almost nothing you can do

In-car entertainment systems, especially the types chosen for camper vans, etc., are often capable of quite high power outputs and usually need speakers capable of being driven at those high power outputs without damage. The trouble is, such speakers usually don't sound so good at the very low volume settings needed for evening and late night use in a campsite environment to avoid annoyance to neighbours. It is a big problem choosing speakers that sound good at low volume and yet can withstand the higher volume needed to overcome the wind and road noise of driving. There have been many technological advances in speaker design and a hi-fi specialist will undoubtedly be able to make suitable recommendations that are resistant to damp conditions, long-lasting and with cones free enough for good reproduction at ultra low volumes but robust enough to withstand high power outputs and such drive units are likely to be fairly expensive. For myself I would choose to use a dual speaker system with a multi-speaker system comprising several low-powered speakers strategically placed for low volume use and a fairly standard high-powered system for normal use and a selector switch.