Jensen Popular Questions, Answers, Tips & Manuals

To set the time on a Jensen JCR-425 clock radio:

1. Press and hold the "Time Set" button until the display flashes.
2. Press the "Hour" and "Minute" buttons to adjust the time.
3. Press "Time Set" again to confirm.

https://www.google.com/url?sa=t&rct=j&q=&esrc=s&source=web&cd=&ved=2ahUKEwj51Nbc4ryCAxW6gf0HHVt2DfQQFnoECBAQAQ&url=https%3A%2F%2Fwww.purkeys.net%2Fwp-content%2Fuploads%2F2019%2F05%2FInverter-300-Watt-User-Guide.pdf&usg=AOvVaw1BAYGo2bHmol735LGv6PgN&opi=89978449

Do the Screen Calibration. https://www.google.com/search?q=Jensen+9022+touch+screen+is+out+of+alignment ..

Try Jensen support for that detail. https://jensenmobile.com/support/ https://jensenmobile.com/shop/multimedia/cr271ml/

If you think it is worth it and it has failed, (replacement is not expensive on fleabay), take it to a car radio repair shop for an estimate or if it is just wiring as a fresh installation, check out the owners manual.

A button probably is stuck or is contaminated and conducting on its own.

It sounds like there may be an issue with the mechanical components of the DVD player, specifically with the tray. Here are some troubleshooting steps you can try:

1. Check to see if the emergency eject feature is working. There should be a small hole on the front of the DVD player, and you can use a paperclip or a similarly sized object to push the button inside. This should manually eject the tray.
2. Make sure that the DVD player is receiving power. Double-check all of the connections and fuses.
3. Reset the DVD player by disconnecting the power for a few minutes, then reconnecting it and trying again.
4. If none of the above steps work, it may be necessary to take the DVD player apart and check the mechanical components for damage or wear. However, this is not recommended unless you have experience with electronics repair.

If none of these steps resolve the issue, you may need to seek the assistance of a professional electronics repair technician.

Hi, Please hold down the open/close button instead of just pressing it. Then you can press the lid while this is happening. I think you might already suspect this, but it sounds like the hook that connects to a portion of the lid isn't unhooken during the button press. Friction might be a cause or the hook-movement might not be functioning as smoothly due to other factors. If the issue continues, we might have to consult Jensen on a potential repair/replacement of the item as well.

This video may help you https://www.youtube.com/watch?v=VC89DgWJlYw

1200 Watts at 12volts is 100 Amps. At least 16mm on a short run.

Your Jenson model as written only appears here on Fixya in your question. The Jenson modelling numbers don't follow what you wrote so your model number 'EOA 7P' is not valid. https://www.google.com/search?q=jensen+eoa+7p ..

hair dryer if just moisture if water [failed seal or damaged cover ] and need to unscrew ans pry apart --but if water most likely electric circuit damage

radio has a serial number your vehicle has a vin ----

I'd contact the manufacture and tell them there wasn't a pump in the box, they should send you one verses having to purchase it.

Not much on it and the manual doesn't mention a fuse. Contact Jenson direct, they are a great company. I have a marine unit. https://www.google.com/search?q=Jensen+pro+media+5000,+replace+fuse ..

No, you cannot use a 270 watt amp kit on a 1000 watt amp. The wattage of the amp kit must be equal to or higher than the wattage of the amp it is being used for.

https://www.manualslib.com/manual/666477/Jensen-Awm965.html

Nobody uses Universal remotes these days. The original or Facsimile (copy) remotes are available! Google; make model remote replacement Remote Codes to operate your JENSEN TV: JENSEN codes 3 digit: 004 009 Newer JENSEN codes 4 digit: 0004 0009 0133 Depending on the remote control you have, the method to search for the code will vary, below is an example that may work with most remotes. ..

Bad main board