Jenoptik Popular Questions, Answers, Tips & Manuals

Do you work here? Claim your company

  • 21 Products
  • 64 Answers

If your photos and videos are stored on the memory card, then remove the memory card from the camera and insert it into an USB memory card reader. Connect this USB memory card reader and memory card into the USB port of your working computer. Your computer will see this as an USB Mass Storage Device or an external storage device; you can then open the folder on the memory card and copy the photos and to your computer. Memory card reader is a handy device and is inexpensive. You can copy photos from other cameras and you can also download photos off your memory card to someone else's computer without the need of installing any programs.

Jenoptik JD C160... | 42 views | 0 helpful votes

Look at your memory card. SD cards have a slide switch along one edge. The position farthest from the metal contacts locks the card, protecting it from writes. The position nearest the contacts unlocks the card.

Jenoptik JD 8.0... | 43 views | 5 helpful votes

You can purchase USB cable - check out this WEB site. Make sure you get the correct cable with the plug that fits your camera.

Jenoptik JD 5.0... | 65 views | 0 helpful votes

Jenoptik JD C... | 75 views | 0 helpful votes

Your camera almost certainly has a lens error, this is such a common fault that I hope you don't mind me pasting my stock generic answer below. No point in reinventing the wheel!

Stuck lenses are probably the most common reason that compact digital cameras get thrown away, but there's a fair chance of recovering use of your camera again

The fault is commonly caused by dirt or grit blocking the mechanism, or due to it having suffered a recent fall. Another common cause is that the camera was in a pocket or bag and the power button accidentally activated and tried to open the lens against resistance. The mechanism may have simply become dislodged or there may be parts which have broken.

If your camera is still under warranty and has definitely not been subject to misuse then contact the Jenoptik service department in your country to find out about a free repair. If the warranty has expired though a professional repair will far exceed the cost of replacing your camera. You will therefore have nothing to lose by trying to fix this yourself.

Please click here and you will be taken to an excellent article provided by the Camera Repair website. For the most part, you'll be guided on how to physically manipulate your camera to try and clear the fault. Although the article mentions Canon a few times, the advice applies equally to all cameras with lens errors and is not model-specific.

If the link doesn't work then cut and paste the following address into your browser:-

Good luck, I hope you manage to use this information to fix your camera, or at least are able to use the information to help decide whether to buy another camera. If you do decide that you have to throw your camera away then don't forget to remove the memory card as it can be used in other devices. Please take a moment to rate the free answer I have provided for you and any testimonial which you might wish to add is always welcome.

Jenoptik JD 8.0... | 79 views | 1 helpful votes

You could try

if you need a user manual

if you want the schematics etc

We've used them in the past and found them very good.

Also if it is not listed then ask via the link and they
will probably be able to get it for you.

Jenoptik JD 4100... | 39 views | 0 helpful votes

The CCD sensor is bad and this can not be repaired.

Jenoptik JD 3.3... | 20 views | 0 helpful votes


There is a very easy way to download those pictures to your PC.
Checkout this tip that I wrote about that.

How to easilydownload Pictures from Digital Camera


Jenoptik JD C... | 67 views | 0 helpful votes

Their website is closed, but if you really need it you could buy one from here:

Jenoptik JD C... | 106 views | 0 helpful votes

This should be displayed when the camera is connected to a computer with the data cable ...and you should choose one of the option ..either to connect and see the cam 's MSDC which is the mass storage card ...or connect on PC act on it for streaming ..
If it is stuck on this mode...remove the cable ..and if it still displaying this and do not react to the on .off...remove the batteries and place them back after ..

Jenoptik Cameras | 204 views | 0 helpful votes

Mo┬×ete skinuti drivere na ovoj stranici: Softpedia.

Jenoptik JD C... | 70 views | 1 helpful votes

may be your card have a physical lock on it by which it is denying you to access files

Jenoptik JD 3.1... | 38 views | 0 helpful votes

Welcome to Fixya
Dear user,
This Seems to be your Cam is taking Multiple Pictures .So there might be Turned on Feature like Continous Shooting Mode/Multi Snap.So turn off it by Going to Settings...[For Specific Instruction- Check Manual to Enter in Settings Menu]
Your problem should be Solved...Thanks for Contacting FixYa...

Jenoptik JD 4.1... | 37 views | 0 helpful votes

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Jenoptik Experts

Muntejaya Ginting
Muntejaya Ginting

Level 3 Expert

10421 Answers


Level 1 Expert

4 Answers

Jaime Hernandez

Level 3 Expert

2337 Answers

Are you a Jenoptik Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides