Jenn-air JGS9900 downdraft slide in gas range - no power and electrical outlet IS working
There are several possible reasons why your Jenn-air JGS9900 gas range may not have power:
- Tripped Circuit Breaker: Check the circuit breaker for the range in your home's electrical panel to see if it has tripped. If it has, reset it.
- Loose Electrical Connection: Check the power cord connection to the range to make sure it is secure. Also, check the wiring connections behind the range to ensure they are properly connected.
- Blown Fuse: If your range has a fuse, check to see if it has blown. You may need to replace it.
- Faulty Control Board: The control board is responsible for supplying power to the range's electronic components. If the control board is faulty, it may need to be replaced.
- Faulty Igniter: If the burners are not igniting, the igniter may be faulty and need to be replaced.
If none of these solutions work, it may be best to contact a professional technician to diagnose and fix the issue.
Jenn-Air jgs8860bdp broiler doesn't ignite.
There are a few potential issues that could cause the problems you're experiencing with your Jenn-Air broiler. Here are a few things you can try:
- Make sure the gas supply to the broiler is turned on and that there are no blockages in the gas line.
- Check the gas valve to make sure it is open and functioning properly.
- Make sure the gas burners are clean and free of any debris or obstruction.
- Check the broiler burner for proper ignition. It should ignite within a few seconds of turning on the broiler. If it does not, the burner orifice may be clogged and will need to be cleaned.
- Check the gas pressure to the broiler. If the gas pressure is too low, it can cause the flames to be low or go out.
- Make sure the broiler igniter is properly seated and connected.
A metal pot lid was set on top of the ceramic cook
In case anyone else encounters this problem here's what
worked for me. I had this happen last night and came here
searching for answers. It did not unloosen on it's own
after being left overnight. Finally this morning I came up
with something that worked for me. Shoot the lid all
around with a hairdryer and use a towel to keep seeing if
it has loosened up enough to move. After a few miuntes of
spraying it with the heat it stared sliding around and then
came up.
Original cost of my fridge from 1999
2389 model
Jeff of Clayton, CA
Original review: June 2, 2006
We purchased a
Jenn-Air JCD2389GES side by side four years ago. We thought we were buying a quality refrigerator, with a name brand that was respectable and with the idea that you get what you pay for. We went ahead and spent
$2200 on purchasing this and within a year noticed that it made noises, the refrigerator side didn't stay cold and the freezer side froze food that developed freezer burn with in a week. Just this past week the refrigerator was on the coldest setting and the food was slightly above room temperature. A hundred dollars of food had to be thrown away.
----------------------------------------------------------------
The best way to find old prices is to find reviews. The best ones are on websites that do reviews themselves as they always list the price.
https://www.google.com/search?q=jenn-air+jcd2289atb+review
..
5/30/2022 4:00:51 PM •
Jenn-Air...
•
Answered
on May 30, 2022
Jenn-Air Maytag double wall oven makes loud buzzing noise
There is a cooling fan for upper and lower oven they run at the same time no matter which oven in use it is fed from the oven manager no way to trouble shoot without pulling oven out some models use same fan for both so you could have a blower on hand remove back panels to access fans take a lead off fan to determine which one noisey
MODEL JEC9530 CUSTOM CONTROL ELEMENT TURNS OFF
i would start with the infinite switch itself
you can find this part at appliance parts pro one word dot come
type in your model number
your looking for part number
AP400965 they are currently in stock
unfortunatley it is expensive around 150.00
tell them your a servicer
working for myyellowdog
it may get you a discount
have a great day
4/7/2022 7:14:48 PM •
Jenn-Air...
•
Answered
on Apr 07, 2022
Clock not bright
We rebuild a lot of this part for the dim display problem. This will save you some money!
fixyourboard.com/boards/71001799.html
11/1/2021 12:03:42 PM •
Jenn-Air...
•
Answered
on Nov 01, 2021
How do I obtain and replace the C3 capacitor
C3 capacitor rated for 68 µF- 35 Volts the closest radial capacitor from RadioShack is P/N 272-1015 (47µF-40 Volts). Pay attention to the position of the "white arrow" on the capacitor when replace. A little patience, a soldering iron and less than $1.50. Your range will be as good as new.Bonne Chance!
10/26/2021 8:00:57 PM •
Jenn-Air...
•
Answered
on Oct 26, 2021
Not finding what you are looking for?